linux – 在ubuntu中安装octave包

任何人都可以帮助我这个错误
octave:4> pkg install signal-1.2.0.tar.gz
error: the following dependencies where unsatisfied:
   signal needs optim >= 1.0.0
 signal needs specfun >= 0.0.0
 signal needs control >= 2.2.3
 signal needs general >= 1.3.2
octave:4> pkg install optim-1.2.2.tar.gz
error: the following dependencies where unsatisfied:
   optim needs miscellaneous >= 1.0.10
 optim needs struct >= 1.0.10
octave:4> pkg install struct-1.0.10.tar.gz
make: /usr/bin/mkoctfile: Command not found
make: *** [fields2cell.oct] Error 127
'make' returned the following error: make: Entering directory `/tmp/oct-fDBs5k/struct-1.0.10/src'
/usr/bin/mkoctfile -s fields2cell.cc
make: Leaving directory `/tmp/oct-fDBs5k/struct-1.0.10/src'
error: called from `pkg>configure_make' in file /usr/share/octave/3.6.2/m/pkg/pkg.m near line 1391,column 9
error: called from:
error:   /usr/share/octave/3.6.2/m/pkg/pkg.m at line 834,column 5
error:   /usr/share/octave/3.6.2/m/pkg/pkg.m at line 383,column 9

我需要安装信号包,但我必须下载其他工作从我已经注意到,但它在安装struct包时卡住.

@编辑
尝试安装misc〜package时出现同样的错误.

octave:5> pkg install miscellaneous-1.2.0.tar.gz
error: the following dependencies where unsatisfied:
   miscellaneous needs general >= 1.3.1
octave:5> pkg install general-1.3.2.tar.gz
make: /usr/bin/mkoctfile: Command not found
make: *** [__exit__.oct] Error 127
'make' returned the following error: make: Entering directory `/tmp/oct-CA6o4U/general/src'
/usr/bin/mkoctfile __exit__.cc
make: Leaving directory `/tmp/oct-CA6o4U/general/src'
error: called from `pkg>configure_make' in file /usr/share/octave/3.6.2/m/pkg/pkg.m near line 1391,column 9

@编辑
附加信息:

octave:6> which mkoctfile
`mkoctfile' is a function from the file /usr/share/octave/3.6.2/m/miscellaneous/mkoctfile.m

我不知道该怎么办..

解决方法

你需要安装mkoctfile.根据您的ubuntu版本,这将是不同的包.它使用在octave-pkg-dev,但现在是在liboctave-dev.

Ubuntu和Debian将其作为单独的软件包,因为只需要自己构建软件包即可.他们希望你使用他们打包的Octave软件包(sudo apt-get install octave-signal).他们的版本将落在实际版本之后,但它们分发的Octave版本也是如此.这是支付稳定的代价.

相关文章

文件查找(find) 1 find 简单的说,就是实时查找指定的内容或条件。特点:最新、最快、最准确。 用法:...
非交互式添加分区 方法一 添加/deb/sdb 下的分区,其实位置为1到1000M,第二个分区位置为1001至3000M,...
编译安装httpd 1 去官网下载源码包 为避免非法软件,一定要去官网下载http://www.apache.org httpd-2.4...
gdisk用法 gdisk - InteractiveGUIDpartitiontable (GPT) manipulator GPTfdisk (akagdisk) isatext-mo...
1 一定用快捷键 这里简单的说下几个常用的快捷按键。 1.1 移动光标快捷键 Crtl + a 光标回到命令行...
bash shell中测试命令 test命令提供了if-than语句中测试不同条件的途径。如果test命令中列出的条件成立...