Ubuntu上的iOS / Mac兼容IPSec VPN服务器

Ubuntu 前端之家
前端之家收集整理的这篇文章主要介绍了Ubuntu上的iOS / Mac兼容IPSec VPN服务器，前端之家小编觉得挺不错的，现在分享给大家，也给大家做个参考。
我从Xen VPS主机支付VPS并且其上的负载相当轻,所以我想从它运行VPN.我正在拍摄的配置是“roadwarrior”风格,因为当我不在家时,我想用它来保护我和iPhone和Mac的连接.请记住,我是程序员,而不是系统管理员,所以这对我来说都是相当陌生的.

在未能使StrongSWAN / PPP / xL2TP设置工作之后,我遇到了racoon,这似乎是一个非常简单的选择.我试图避免使用证书,因为将证书放到iOS设备上的过程可能很烦人(只是一个猜测).因此,我在VPS上配置了racoon,以便我可以成功连接到它并通过系统用户数据库支持的XAUTH进行身份验证.这一切似乎都在起作用,这是NAT /网络的东西,它不起作用,而且我完全不符合我的要素.

我的VPS正在运行Ubuntu 10.10.我从ifconfig得到以下输出(我猜它可能是相关的)：

eth0      Link encap:Ethernet  HWaddr 00:16:3e:4a:7f:29  
          inet addr:69.172.231.11  Bcast:69.172.231.63  Mask:255.255.255.192
          inet6 addr: fe80::216:3eff:fe4a:7f29/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5234214 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2417090 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:553246281 (553.2 MB)  TX bytes:5237753987 (5.2 GB)
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1577698 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1577698 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0

这是我的racoon@R_301_382@：

path pre_shared_key "/etc/racoon/psk.txt";
path certificate "/etc/racoon/certs";

timer {
        natt_keepalive 10sec;
}

remote anonymous {
        exchange_mode main,aggressive,base;
        doi ipsec_doi;
        situation identity_only;
        nat_traversal on;
        script "/etc/racoon/phase1-up.sh" phase1_up;
        script "/etc/racoon/phase1-down.sh" phase1_down;
        generate_policy on;
        ike_frag on;
        passive on;
        my_identifier address 69.172.231.11;
        peers_identifier fqdn "zcr.me";
        proposal {
                encryption_algorithm aes;
                hash_algorithm sha1;
                authentication_method xauth_psk_server;
                dh_group 2;
        }
        proposal_check claim;
}


sainfo anonymous {
        encryption_algorithm aes;
        authentication_algorithm hmac_sha1;
        compression_algorithm deflate;
}

mode_cfg {
        auth_source system;
        save_passwd on;
        network4 10.1.0.0;
        pool_size 100;
}

这个配置已经从围绕’网络的各种教程拼凑而成,所以它可能……很奇怪.当我连接到VPN时,在客户端收到以下输出：

4/12/11 2:21:43 PM  racoon[191] Connecting.
4/12/11 2:21:43 PM  racoon[191] IKE Packet: transmit success. (Initiator,Aggressive-Mode message 1).
4/12/11 2:21:43 PM  racoon[191] IKEv1 Phase1 AUTH: success. (Initiator,Aggressive-Mode Message 2).
4/12/11 2:21:43 PM  racoon[191] IKE Packet: receive success. (Initiator,Aggressive-Mode message 2).
4/12/11 2:21:43 PM  racoon[191] IKEv1 Phase1 Initiator: success. (Initiator,Aggressive-Mode).
4/12/11 2:21:43 PM  racoon[191] IKE Packet: transmit success. (Initiator,Aggressive-Mode message 3).
4/12/11 2:21:46 PM  racoon[191] IKE Packet: transmit success. (Mode-Config message).
4/12/11 2:21:46 PM  racoon[191] IKEv1 XAUTH: success. (XAUTH Status is OK).
4/12/11 2:21:46 PM  racoon[191] IKE Packet: transmit success. (Mode-Config message).
4/12/11 2:21:46 PM  racoon[191] IKEv1 Config: retransmited. (Mode-Config retransmit).
4/12/11 2:21:46 PM  racoon[191] IKE Packet: receive success. (MODE-Config).
4/12/11 2:21:46 PM  racoon[191] IKE Packet: transmit success. (Initiator,Quick-Mode message 1).
4/12/11 2:21:46 PM  racoon[191] IKE Packet: receive success. (Initiator,Quick-Mode message 2).
4/12/11 2:21:46 PM  racoon[191] IKE Packet: transmit success. (Initiator,Quick-Mode message 3).
4/12/11 2:21:46 PM  racoon[191] IKEv1 Phase2 Initiator: success. (Initiator,Quick-Mode).
4/12/11 2:22:03 PM  racoon[191] IKE Packet: transmit success. (Information message).
4/12/11 2:22:03 PM  racoon[191] IKEv1 Information-Notice: transmit success. (R-U-THERE?).
4/12/11 2:22:03 PM  racoon[191] IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
4/12/11 2:22:04 PM  racoon[191] IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
4/12/11 2:22:04 PM  racoon[191] IKE Packet: receive success. (Information message).
4/12/11 2:22:04 PM  racoon[191] IKE Packet: transmit success. (Information message).
4/12/11 2:22:04 PM  racoon[191] IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA).
4/12/11 2:22:04 PM  racoon[191] IKE Packet: transmit success. (Information message).
4/12/11 2:22:04 PM  racoon[191] IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA).

相同的连接在服务器端生成以下输出：

Apr 12 13:20:20 Zaccaro racoon: INFO: respond new phase 1 negotiation: SERVER.IP.ADDRESS[500]<=>CLIENT.IP.ADDRESS[500]
Apr 12 13:20:20 Zaccaro racoon: INFO: begin Aggressive mode.
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: RFC 3947
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-08
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-07
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-06
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-05
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-04
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-03
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-02#012
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: draft-ietf-ipsra-isakmp-xauth-06.txt
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: CISCO-UNITY
Apr 12 13:20:20 Zaccaro racoon: INFO: received Vendor ID: DPD
Apr 12 13:20:20 Zaccaro racoon: WARNING: No ID match.
Apr 12 13:20:20 Zaccaro racoon: INFO: Selected NAT-T version: RFC 3947
Apr 12 13:20:20 Zaccaro racoon: INFO: Adding remote and local NAT-D payloads.
Apr 12 13:20:20 Zaccaro racoon: INFO: Hashing CLIENT.IP.ADDRESS[500] with algo #2 
Apr 12 13:20:20 Zaccaro racoon: INFO: Hashing SERVER.IP.ADDRESS[500] with algo #2 
Apr 12 13:20:20 Zaccaro racoon: INFO: Adding xauth VID payload.
Apr 12 13:20:20 Zaccaro racoon: INFO: NAT-T: ports changed to: SERVER.IP.ADDRESS[32768]<->CLIENT.IP.ADDRESS[4500]
Apr 12 13:20:20 Zaccaro racoon: INFO: Hashing SERVER.IP.ADDRESS[4500] with algo #2 
Apr 12 13:20:20 Zaccaro racoon: INFO: NAT-D payload #0 verified
Apr 12 13:20:20 Zaccaro racoon: INFO: Hashing CLIENT.IP.ADDRESS[32768] with algo #2 
Apr 12 13:20:20 Zaccaro racoon: INFO: NAT-D payload #1 doesn't match
Apr 12 13:20:20 Zaccaro racoon: WARNING: ignore INITIAL-CONTACT notification,because it is only accepted after phase1.
Apr 12 13:20:20 Zaccaro racoon: INFO: NAT detected: PEER
Apr 12 13:20:20 Zaccaro racoon: INFO: Sending Xauth request
Apr 12 13:20:20 Zaccaro racoon: INFO: ISAKMP-SA established SERVER.IP.ADDRESS[4500]-CLIENT.IP.ADDRESS[32768] spi:651d506ebbf13d5b:98e862615eac09da
Apr 12 13:20:23 Zaccaro racoon: INFO: Using port 0
Apr 12 13:20:23 Zaccaro racoon: INFO: login succeeded for user "username"
Apr 12 13:20:23 Zaccaro racoon: WARNING: Ignored attribute INTERNAL_ADDRESS_EXPIRY
Apr 12 13:20:23 Zaccaro racoon: WARNING: Ignored attribute 28683
Apr 12 13:20:23 Zaccaro racoon: INFO: unsupported PF_KEY message REGISTER
Apr 12 13:20:23 Zaccaro racoon: INFO: respond new phase 2 negotiation: SERVER.IP.ADDRESS[4500]<=>CLIENT.IP.ADDRESS[32768]
Apr 12 13:20:23 Zaccaro racoon: INFO: no policy found,try to generate the policy : 10.1.0.0/32[0] 0.0.0.0/0[0] proto=any dir=in
Apr 12 13:20:23 Zaccaro racoon: INFO: Adjusting my encmode UDP-Tunnel->Tunnel
Apr 12 13:20:23 Zaccaro racoon: INFO: Adjusting peer's encmode UDP-Tunnel(3)->Tunnel(1)
Apr 12 13:20:23 Zaccaro racoon: INFO: IPsec-SA established: ESP/Tunnel CLIENT.IP.ADDRESS[32768]->SERVER.IP.ADDRESS[4500] spi=141535132(0x86fa79c)
Apr 12 13:20:23 Zaccaro racoon: INFO: IPsec-SA established: ESP/Tunnel SERVER.IP.ADDRESS[4500]->CLIENT.IP.ADDRESS[32768] spi=48270910(0x2e08e3e)
Apr 12 13:20:23 Zaccaro racoon: ERROR: such policy does not already exist: "10.1.0.0/32[0] 0.0.0.0/0[0] proto=any dir=in"
Apr 12 13:20:23 Zaccaro racoon: ERROR: such policy does not already exist: "10.1.0.0/32[0] 0.0.0.0/0[0] proto=any dir=fwd"
Apr 12 13:20:23 Zaccaro racoon: ERROR: such policy does not already exist: "0.0.0.0/0[0] 10.1.0.0/32[0] proto=any dir=out"
Apr 12 13:20:40 Zaccaro racoon: INFO: generated policy,deleting it.
Apr 12 13:20:40 Zaccaro racoon: INFO: purged IPsec-SA proto_id=ESP spi=48270910.
Apr 12 13:20:40 Zaccaro racoon: INFO: ISAKMP-SA expired SERVER.IP.ADDRESS[4500]-CLIENT.IP.ADDRESS[32768] spi:651d506ebbf13d5b:98e862615eac09da
Apr 12 13:20:41 Zaccaro racoon: INFO: ISAKMP-SA deleted SERVER.IP.ADDRESS[4500]-CLIENT.IP.ADDRESS[32768] spi:651d506ebbf13d5b:98e862615eac09da
Apr 12 13:20:41 Zaccaro racoon: INFO: Released port 0
Apr 12 13:20:41 Zaccaro racoon: INFO: unsupported PF_KEY message REGISTER
Apr 12 13:21:02 Zaccaro sm-msp-queue[23481]: unable to qualify my own domain name (Zaccaro) -- using short name

我认为部分问题可能源于phase1up和phase1down脚本.

phase1-up.sh：

#!/bin/bash

PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin

echo "
spdadd 192.168.1.0/24 ${INTERNAL_ADDR4}/32 any
        -P out ipsec esp/tunnel/${LOCAL_ADDR}[4500]-${REMOTE_ADDR}[4500]/require;
spdadd ${INTERNAL_ADDR4}/32 192.168.1.0/24 any
        -P in ipsec esp/tunnel/${REMOTE_ADDR}[4500]-${LOCAL_ADDR}[4500]/require;
" | setkey -c

phase1-down.sh：

#!/bin/bash

PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin

echo "
deleteall ${REMOTE_ADDR} ${LOCAL_ADDR} esp;
deleteall ${LOCAL_ADDR} ${REMOTE_ADDR} esp;

spddelete 192.168.1.0/24[any] ${INTERNAL_ADDR4}[any] any
        -P out ipsec esp/tunnel/${LOCAL_ADDR}-${REMOTE_ADDR}/require;
spddelete  ${INTERNAL_ADDR4}[any] 192.168.1.0/24 [any] any
        -P in ipsec esp/tunnel/${REMOTE_ADDR}-${LOCAL_ADDR}/require;
" | setkey -c

所有这一切都发生了,客户端说它已成功连接IP地址10.1.0.0.此时,任何连接到互联网的尝试都会立即失败.这就是问题所在.

编辑：这里有更多的诊断信息.

当我连接到VPN时,ping到VPS的公共IP地址成功.但是,ping到8.8.8.8(VPN默认设置为使用的DNS服务器)会给出超时.因此,根本不能解析主机名.

第二次编辑：

» route -nv      
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
69.172.231.0    0.0.0.0         255.255.255.192 U     0      0        0 eth0
0.0.0.0         69.172.231.1    0.0.0.0         UG    0      0        0 eth0

» iptables -L -nv
Chain INPUT (policy ACCEPT 49270 packets,6376K bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 0 packets,0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 42570 packets,8573K bytes)
 pkts bytes target     prot opt in     out     source               destination
你从哪里得到phase1-up.sh和phase1-down.sh脚本？在racoon发布中应该有一些例子,在… / racoon / samples / roadwarrior / client /下.尝试使用那些.作为一个快速实验,您可以用10.1.0.0/24替换这些脚本中192.168.1.0/24的所有出现,但我不知道您是如何在Ubuntu VPS上设置网络的.如果这些步骤都不起作用,请发布命令的输出 
route -nv
iptables -L -nv

在你的Ubuntu VPS上.

原文链接：https://www.f2er.com/ubuntu/348407.html

猜你在找的Ubuntu相关文章

学linux,从Ubuntu开始
1.安装过程出现0x00000000指令引用的0x00000000内存该内存不能为written 如果你安装的是in...
ubuntu16.04获取root权限并用root用户登录
写在全面：如果根据以下教程涉及到只读文件需要更改文件权限才能需修改文件内容，参考我的...
ubuntu18.04获取root权限并用root用户登录
写在前面：以下步骤中需要在终端输入命令，电脑端查看博客的朋友可以直接复制粘贴到终端，...
ubuntu16.04和18.04更换国内源
ubuntu16.04和18.04更换国内源 写在前面：安装好ubuntu双系统后，默认的软件更新源是国外的...
ubuntu双系统启动时卡死解决办法
ubuntu双系统启动时卡死解决办法（在ubuntu16.04和18.04测试无误） 问题描述： 在安装完ub...
Ubuntu安装ssh
Ubuntu报“xxx is not in the sudoers file.This incident will be reported” 错误解决方法
ubuntu-make | Ubuntu Linux一键安装开发环境
-- 作者 谢恩铭 转载请注明出处 内容简介 什么是ubuntu-make 安装最新版ubuntu-make 用ubu...
Ubuntu 17.04（Zesty Zapus）正式发布，可以下载使用了
今天，2017 年 4 月 13 日，Canonical 官方发布了 Ubuntu 17.04（Zesty Zapus）的最终版。...
Ubuntu 为钱而放弃 Unity ？ Linux 社区的反应
（点击上方公众号，可快速关注） 编译：伯乐在线/黄小非 如有好文章投稿，请点击 → 这里...
LinuxWindowsCentOSUbuntuNginxWebServiceScalaMemcacheApacheRedisDockerBashAzureTomcatLNMPShell数据结构服务器运维网络安全
xebugnodemondocker-copydcoselasticsearcwindows-contdocker-windodocker-awsamazon-cloudenvoyproxyhashicorp-vaswisscomdevkafka-pythonzscalerphoton-osdocker-swarmkamongoogle-cloudconcoursewso2-ampersistent-vapi-managerprocess-manamanjarojenkins-workhypriotremoteapikeystonejsbitcoindbitcoin-test