错误：configure: error: libevent >= 1.4.11 could not be found 解决：yum -y install libevent libevent-devel 错误：configure: error: Please reinstall the MysqL distributio 解决：yum -y install MysqL-devel 错误：make: [sapi/fpm/PHP-fpm] error 1 解决：用make ZEND_EXTRA_LIBS='-liconv'编译 错误：configure: error: XML configuration could not be found 解决：yum -y install libxml2 libxml2-devel 错误：configure: error: No curses/termcap library found 解决：yum -y install ncurses ncurses-devel 错误：configure: error: xml2-config not found 解决：yum -y install libxml2 libxml2-devel 错误：configure: error: Cannot find OpenSSL's <evp.h> 解决：yum install openssl openssl-devel 错误：configure: error: Please reinstall the libcurl distribution -easy.h should be in 更多的补充内容：
安装PHP: ./configure
configure: error: XML configuration could not be found yum -y install libxml2 libxml2-devel Cannot find OpenSSL's <evp.h>
yum install openssl openssl-devel 1) Configure: error: xml2-config not found. Please check your libxml2 installation.
#yum install libxml2 libxml2-devel (For RedHat & Fedora)
# aptitude install libxml2-dev (For Ubuntu) 2) Checking for pkg-config… /usr/bin/pkg-config
configure: error: Cannot find OpenSSL's <evp.h>
#yum install openssl openssl-devel 3) Configure: error: Please reinstall the BZip2 distribution
# yum install bzip2 bzip2-devel 4) Configure: error: Please reinstall the libcurl distribution -
easy.h should be in
# yum install curl curl-devel (For RedHat & Fedora)
# install libcurl4-gnutls-dev (For Ubuntu) 5) Configure: error: libjpeg.(also) not found.
# yum install libjpeg libjpeg-devel 6) Configure: error: libpng.(also) not found.
# yum install libpng libpng-devel 7) Configure: error: freetype.h not found.
#yum install freetype-devel 8) Configure: error: Unable to locate gmp.h
# yum install gmp-devel 9) Configure: error: Cannot find MysqL header files under /usr.
Note that the MysqL client library is not bundled anymore!
# yum install MysqL-devel (For RedHat & Fedora)
# apt-get install libMysqL++-dev (For Ubuntu) 10) Configure: error: Please reinstall the ncurses distribution
# yum install ncurses ncurses-devel 11) Checking for unixODBC support… configure: error: ODBC header file ‘/usr/include/sqlext.h' not found!
# yum install unixODBC-devel 12) Configure: error: Cannot find pspell
# yum install pspell-devel 13) configure: error: mcrypt.h not found. Please reinstall libmcrypt.
# yum install libmcrypt libmcrypt-devel (For RedHat & Fedora)
# apt-get install libmcrypt-dev 14) Configure: error: snmp.h not found. Check your SNMP installation.
# yum install net-snmp net-snmp-devel 15)
/usr/bin/ld: cannot find -lltdl
collect2: ld returned 1 exit status
make:
# yum install libtool-ltdl.x86_64 libtool-ltdl-devel.x86_64 16）
为PHP编译xcache模块的时候，需要运行PHPize
得到了一个错误
#/usr/local/PHP/bin/PHPize
Configuring for:
PHP Api Version: 20041225
Zend Module Api No: 20060613
Zend Extension Api No: 220060519
Cannot find autoconf. Please check your autoconf installation and the $PHP_AUTOCONF
environment variable is set correctly and then rerun this script.
通过安装 autoconf 可以解决
centos下执行 yum install autoconf 即可
Ubuntu下执行 apt-get install autoconf 即可
17）
# /usr/local/PHP/bin/PHPize
Cannot find config.m4.
Make sure that you run '/usr/local/PHP/bin/PHPize' in the top level source directory of the module
修改方法：
[root@centos lnmp]# cd PHP-5.2.14ext/
[root@centos ext]# ./ext_skel --extname=my_module
Creating directory my_module
Creating basic files: config.m4 config.w32 .cvsignore my_module.c PHP_my_module.h CREDITS EXPERIMENTAL tests/001.PHPt my_module.PHP [done].
To use your new extension,you will have to execute the following steps:
1. $ cd ..
2. $ vi ext/my_module/config.m4
3. $ ./buildconf
4. $ ./configure --[with|enable]-my_module
5. $ make
6. $ ./PHP -f ext/my_module/my_module.PHP
7. $ vi ext/my_module/my_module.c
8. $ make
Repeat steps 3-6 until you are satisfied with ext/my_module/config.m4 and
step 6 confirms that your module is compiled into PHP. Then,start writing
code and repeat the last two steps as often as necessary.
[root@centos ext]# cd my_module/
[root@centos my_module]# vim config.m4
根据你自己的选择将
dnl PHP_ARG_WITH(my_module,for my_module support,
dnl Make sure that the comment is aligned:
dnl [ --with-my_module Include my_module support])
修改成
PHP_ARG_WITH(my_module,
Make sure that the comment is aligned:
[ --with-my_module Include my_module support])
或者将
dnl PHP_ARG_ENABLE(my_module,whether to enable my_module support,
dnl Make sure that the comment is aligned:
dnl [ --enable-my_module Enable my_module support])
修改成
PHP_ARG_ENABLE(my_module,
Make sure that the comment is aligned:
[ --enable-my_module Enable my_module support])
[root@centos my_module]# vim my_module.c
将文件其中的下列代码进行修改
/ Every user visible function must have an entry in my_module_functions[].
/
function_entry my_module_functions[] = {
PHP_FE(say_hello, NULL) / ?添加着一行代码 /
PHP_FE(confirm_my_module_compiled, NULL) / For testing,remove later. /
{NULL,NULL,NULL} / Must be the last line in my_module_functions[] /
};
在文件的最后添加下列代码
PHP_FUNCTION(say_hello)
{
zend_printf("hello sdomain!");
}
再修改：PHP_sdomain.h
vi PHP_sdomain.h
在PHP_FUNCTION(confirm_my_module_compiled ); / For testing,remove later. / 这行的下面添加一行：
PHP_FUNCTION(say_hello); / For testing,remove later. /
保存文件退出
然后我们就可以在这个目录下使用上面的命令了
/usr/local/PHP/bin/PHPize
执行以后会看到下面的
[root@ns sdomain]# /usr/local/PHP/bin/PHPize
Configuring for:
PHP Api Version: 20020918
Zend Module Api No: 20020429
Zend Extension Api No: 20050606
[root@ns sdomain]#
然后执行./configure --with-PHP-config=/usr/local/PHP/bin/PHP-config
然后执行make
make install
然后他会把对应的so文件生成放到PHP安装目录下面的一个文件夹，并提示在在什么地方，然后再把里面的SO文件拷到你存放SO文件的地方
即你在PHP.ini里面的extension_dir所指定的位置
最后一步是你在PHP.ini文件中打开这个扩展
extension=sdomain.so
然后
重新起动apache 以上错误都是在整个编译安装遇到的问题，然后结合网上的资料，找到的解决方法，总结到这个地方，希望能帮到大家！
