php-beanstalkd消息队列类实例分享

本文实例为大家分享了PHP beanstalkd消息队列类的具体代码，供大家参考，具体内容如下

PHP;"> use RuntimeException;

/**

An interface to the beanstalk queue service. Implements the beanstalk
protocol spec 1.9. Where appropriate the documentation from the protocol
has been added to the docblocks in this class.
@link https://github.com/kr/beanstalkd/blob/master/doc/protocol.txt
*/
class BeanStalk {

/**

Minimum priority value which can be assigned to a job. The minimum
priority value is also the highest priority a job can have.
@var integer
*/
const MIN_PRIORITY = 0;

/**

Maximum priority value which can be assigned to a job. The maximum
priority value is also the lowest priority a job can have.
@var integer
*/
const MAX_PRIORITY = 4294967295;

/**

Holds a boolean indicating whether a connection to the server is
currently established or not.
@var boolean
*/
public $connected = false;

/**

Holds configuration values.
@var array
*/
protected $_config = [];

/**

The current connection resource handle (if any).
@var resource
*/
protected $_connection;

/**

Constructor.
@param array $config An array of configuration values:
- 'persistent' Whether to make the connection persistent or
not,defaults to true as the FAQ recommends
persistent connections.
- 'host' The beanstalk server hostname or IP address to
connect to,defaults to 127.0.0.1.
- 'port' The port of the server to connect to,defaults
to 11300.
- 'timeout' Timeout in seconds when establishing the
connection,defaults to 1.
- 'logger' An instance of a PSR-3 compatible logger.
@link https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-3-logger-interface.md
@return void
*/
public function __construct(array $config = []) {
$defaults = [
'persistent' => true,'host' => '127.0.0.1','port' => 11300,'timeout' => 1,'logger' => null
];
$this->_config = $config + $defaults;
}

/**

Destructor,disconnects from the server.
@return void
*/
public function __destruct() {
$this->disconnect();
}

/**

Initiates a socket connection to the beanstalk server. The resulting
stream will not have any timeout set on it. Which means it can wait
an unlimited amount of time until a packet becomes available. This
is required for doing blocking reads.
@see \Beanstalk\Client::$_connection
@see \Beanstalk\Client::reserve()
@return boolean true if the connection was established,false otherwise.
*/
public function connect() {
if (isset($this->_connection)) {
$this->disconnect();
}
$errNum = '';
$errStr = '';
$function = $this->_config['persistent'] ? 'pfsockopen' : 'fsockopen';
$params = [$this->_config['host'],$this->_config['port'],&$errNum,&$errStr];

if ($this->_config['timeout']) {
  $params[] = $this->_config['timeout'];
}
$this->_connection = @call_user_func_array($function,$params);

if (!empty($errNum) || !empty($errStr)) {
  $this->_error("{$errNum}: {$errStr}");
}

$this->connected = is_resource($this->_connection);

if ($this->connected) {
  stream_set_timeout($this->_connection,-1);
}
return $this->connected;

}

/**

Closes the connection to the beanstalk server by first signaling
that we want to quit then actually closing the socket connection.
@return boolean true if diconnecting was successful.
*/
public function disconnect() {
if (!is_resource($this->_connection)) {
$this->connected = false;
} else {
$this->_write('quit');
$this->connected = !fclose($this->_connection);

if (!$this->connected) {
$this->_connection = null;
}
}
return !$this->connected;
}

/**

Pushes an error message to the logger,when one is configured.
@param string $message The error message.
@return void
*/
protected function _error($message) {
if ($this->_config['logger']) {
$this->_config['logger']->error($message);
}
}

public function errors()
{
return $this->_config['logger'];
}
/**

Writes a packet to the socket. Prior to writing to the socket will
check for availability of the connection.
@param string $data
@return integer|boolean number of written bytes or false on error.
*/
protected function _write($data) {
if (!$this->connected) {
$message = 'No connecting found while writing data to socket.';
throw new RuntimeException($message);
}

$data .= "\r\n";
return fwrite($this->_connection,$data,strlen($data));

}

/**

Reads a packet from the socket. Prior to reading from the socket
will check for availability of the connection.
@param integer $length Number of bytes to read.
@return string|boolean Data or false on error.
*/
protected function _read($length = null) {
if (!$this->connected) {
$message = 'No connection found while reading data from socket.';
throw new RuntimeException($message);
}
if ($length) {
if (feof($this->_connection)) {
return false;
}
$data = stream_get_contents($this->_connection,$length + 2);
$Meta = streamgetMeta_data($this->_connection);

if ($Meta['timed_out']) {
$message = 'Connection timed out while reading data from socket.';
throw new RuntimeException($message);
}
$packet = rtrim($data,"\r\n");
} else {
$packet = stream_get_line($this->_connection,16384,"\r\n");
}
return $packet;
}

/ Producer Commands /

/**

The put command is for any process that wants to insert a job into the queue.
@param integer $pri Jobs with smaller priority values will be scheduled
before jobs with larger priorities. The most urgent priority is
0; the least urgent priority is 4294967295.
@param integer $delay Seconds to wait before putting the job in the
ready queue. The job will be in the "delayed" state during this time.
@param integer $ttr Time to run - Number of seconds to allow a worker to
run this job. The minimum ttr is 1.
@param string $data The job body.
@return integer|boolean false on error otherwise an integer indicating
the job id.
*/
public function put($pri,$delay,$ttr,$data) {
$this->_write(sprintf("put %d %d %d %d\r\n%s",$pri,strlen($data),$data));
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'INSERTED':
  case 'BURIED':
    return (integer) strtok(' '); // job id
  case 'EXPECTED_CRLF':
  case 'JOB_TOO_BIG':
  default:
    $this->_error($status);
    return false;
}

}

/**

The use command is for producers. Subsequent put commands will put
jobs into the tube specified by this command. If no use command has
been issued,jobs will be put into the tube named default.
@param string $tube A name at most 200 bytes. It specifies the tube to
use. If the tube does not exist,it will be created.
@return string|boolean false on error otherwise the name of the tube.
*/
public function useTube($tube) {
$this->_write(sprintf('use %s',$tube));
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'USING':
    return strtok(' ');
  default:
    $this->_error($status);
    return false;
}

}

/**

Pause a tube delaying any new job in it being reserved for a given time.
@param string $tube The name of the tube to pause.
@param integer $delay Number of seconds to wait before reserving any more
jobs from the queue.
@return boolean false on error otherwise true.
*/
public function pauseTube($tube,$delay) {
$this->_write(sprintf('pause-tube %s %d',$tube,$delay));
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'PAUSED':
    return true;
  case 'NOT_FOUND':
  default:
    $this->_error($status);
    return false;
}

}

/ Worker Commands /

/**

Reserve a job (with a timeout).
@param integer $timeout If given specifies number of seconds to wait for
a job. 0 returns immediately.
@return array|false false on error otherwise an array holding job id
and body.
*/
public function reserve($timeout = null) {
if (isset($timeout)) {
$this->_write(sprintf('reserve-with-timeout %d',$timeout));
} else {
$this->_write('reserve');
}
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'RESERVED':
    return [
      'id' => (integer) strtok(' '),'body' => $this->_read((integer) strtok(' '))
    ];
  case 'DEADLINE_SOON':
  case 'TIMED_OUT':
  default:
    $this->_error($status);
    return false;
}

}

/**

Removes a job from the server entirely.
@param integer $id The id of the job.
@return boolean false on error,true on success.
*/
public function delete($id) {
$this->_write(sprintf('delete %d',$id));
$status = $this->_read();

switch ($status) {
  case 'DELETED':
    return true;
  case 'NOT_FOUND':
  default:
    $this->_error($status);
    return false;
}

}

/**

Puts a reserved job back into the ready queue.
@param integer $id The id of the job.
@param integer $pri Priority to assign to the job.
@param integer $delay Number of seconds to wait before putting the job in the ready queue.
@return boolean false on error,true on success.
*/
public function release($id,$delay) {
$this->_write(sprintf('release %d %d %d',$id,$delay));
$status = $this->_read();

switch ($status) {
  case 'RELEASED':
  case 'BURIED':
    return true;
  case 'NOT_FOUND':
  default:
    $this->_error($status);
    return false;
}

}

/**

Puts a job into the buried state Buried jobs are put into a FIFO
linked list and will not be touched until a client kicks them.
@param integer $id The id of the job.
@param integer $pri New priority to assign to the job.
@return boolean false on error,true on success.
*/
public function bury($id,$pri) {
$this->_write(sprintf('bury %d %d',$pri));
$status = $this->_read();

switch ($status) {
  case 'BURIED':
    return true;
  case 'NOT_FOUND':
  default:
    $this->_error($status);
    return false;
}

}

/**

Allows a worker to request more time to work on a job.
@param integer $id The id of the job.
@return boolean false on error,true on success.
*/
public function touch($id) {
$this->_write(sprintf('touch %d',$id));
$status = $this->_read();

switch ($status) {
  case 'TOUCHED':
    return true;
  case 'NOT_TOUCHED':
  default:
    $this->_error($status);
    return false;
}

}

/**

Adds the named tube to the watch list for the current connection.
@param string $tube Name of tube to watch.
@return integer|boolean false on error otherwise number of tubes in watch list.
*/
public function watch($tube) {
$this->_write(sprintf('watch %s',' ');

switch ($status) {
  case 'WATCHING':
    return (integer) strtok(' ');
  default:
    $this->_error($status);
    return false;
}

}

/**

Remove the named tube from the watch list.
@param string $tube Name of tube to ignore.
@return integer|boolean false on error otherwise number of tubes in watch list.
*/
public function ignore($tube) {
$this->_write(sprintf('ignore %s',' ');

switch ($status) {
  case 'WATCHING':
    return (integer) strtok(' ');
  case 'NOT_IGNORED':
  default:
    $this->_error($status);
    return false;
}

}

/ Other Commands /

/**

Inspect a job by its id.
@param integer $id The id of the job.
@return string|boolean false on error otherwise the body of the job.
*/
public function peek($id) {
$this->_write(sprintf('peek %d',$id));
return $this->_peekRead();
}

/**

Inspect the next ready job.
@return string|boolean false on error otherwise the body of the job.
*/
public function peekReady() {
$this->_write('peek-ready');
return $this->_peekRead();
}

/**

Inspect the job with the shortest delay left.
@return string|boolean false on error otherwise the body of the job.
*/
public function peekDelayed() {
$this->_write('peek-delayed');
return $this->_peekRead();
}

/**

Inspect the next job in the list of buried jobs.
@return string|boolean false on error otherwise the body of the job.
*/
public function peekBuried() {
$this->_write('peek-buried');
return $this->_peekRead();
}

/**

Handles response for all peek methods.
@return string|boolean false on error otherwise the body of the job.
*/
protected function _peekRead() {
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'FOUND':
    return [
      'id' => (integer) strtok(' '),'body' => $this->_read((integer) strtok(' '))
    ];
  case 'NOT_FOUND':
  default:
    $this->_error($status);
    return false;
}

}

/**

Moves jobs into the ready queue (applies to the current tube).
If there are buried jobs those get kicked only otherwise delayed
jobs get kicked.
@param integer $bound Upper bound on the number of jobs to kick.
@return integer|boolean False on error otherwise number of jobs kicked.
*/
public function kick($bound) {
$this->_write(sprintf('kick %d',$bound));
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'KICKED':
    return (integer) strtok(' ');
  default:
    $this->_error($status);
    return false;
}

}

/**

This is a variant of the kick command that operates with a single
job identified by its job id. If the given job id exists and is in a
buried or delayed state,it will be moved to the ready queue of the
the same tube where it currently belongs.
@param integer $id The job id.
@return boolean false on error true otherwise.
*/
public function kickJob($id) {
$this->_write(sprintf('kick-job %d',$id));
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'KICKED':
    return true;
  case 'NOT_FOUND':
  default:
    $this->_error($status);
    return false;
}

}

/ Stats Commands /

/**

Gives statistical information about the specified job if it exists.
@param integer $id The job id.
@return string|boolean false on error otherwise a string with a yaml formatted dictionary.
*/
public function statsJob($id) {
$this->_write(sprintf('stats-job %d',$id));
return $this->_statsRead();
}

/**

Gives statistical information about the specified tube if it exists.
@param string $tube Name of the tube.
@return string|boolean false on error otherwise a string with a yaml formatted dictionary.
*/
public function statsTube($tube) {
$this->_write(sprintf('stats-tube %s',$tube));
return $this->_statsRead();
}

/**

Gives statistical information about the system as a whole.
@return string|boolean false on error otherwise a string with a yaml formatted dictionary.
*/
public function stats() {
$this->_write('stats');
return $this->_statsRead();
}

/**

Returns a list of all existing tubes.
@return string|boolean false on error otherwise a string with a yaml formatted list.
*/
public function listTubes() {
$this->_write('list-tubes');
return $this->_statsRead();
}

/**

Returns the tube currently being used by the producer.
@return string|boolean false on error otherwise a string with the name of the tube.
*/
public function listTubeUsed() {
$this->_write('list-tube-used');
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'USING':
    return strtok(' ');
  default:
    $this->_error($status);
    return false;
}

}

/**

Returns a list of tubes currently being watched by the worker.
@return string|boolean false on error otherwise a string with a yaml formatted list.
*/
public function listTubesWatched() {
$this->_write('list-tubes-watched');
return $this->_statsRead();
}

/**

Handles responses for all stat methods.
@param boolean $decode Whether to decode data before returning it or not. Default is true.
@return array|string|boolean false on error otherwise statistical data.
*/
protected function _statsRead($decode = true) {
$status = strtok($this->_read(),' ');

switch ($status) {
  case 'OK':
    $data = $this->_read((integer) strtok(' '));
    return $decode ? $this->_decode($data) : $data;
  default:
    $this->_error($status);
    return false;
}

}

/**

Decodes YAML data. This is a super naive decoder which just works on
a subset of YAML which is commonly returned by beanstalk.
@param string $data The data in YAML format,can be either a list or a dictionary.
@return array An (associative) array of the converted data.
*/
protected function _decode($data) {
$data = array_slice(explode("\n",$data),1);
$result = [];

foreach ($data as $key => $value) {
  if ($value[0] === '-') {
    $value = ltrim($value,'- ');
  } elseif (strpos($value,':') !== false) {
    list($key,$value) = explode(':',$value);
    $value = ltrim($value,' ');
  }
  if (is_numeric($value)) {
    $value = (integer) $value == $value ? (integer) $value : (float) $value;
  }
  $result[$key] = $value;
}
return $result;

}
}

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持编程之家。

原文链接：https://www.f2er.com/php/17132.html

php-beanstalkd消息队列类实例分享

猜你在找的PHP相关文章