linux – SCSI读取(10)和写入(10)与SCSI通用接口

前端之家收集整理的这篇文章主要介绍了linux – SCSI读取(10)和写入(10)与SCSI通用接口前端之家小编觉得挺不错的,现在分享给大家,也给大家做个参考。

我尝试向SSD发布scsi read(10)write(10).我使用this example code作为参考/基本代码.

这是我的scsi阅读:

#define READ_REPLY_LEN 32
#define READ_CMDLEN 10
void scsi_read()
{
  unsigned char Readbuffer[ SCSI_OFF + READ_REPLY_LEN ];
  unsigned char cmdblk [ READ_CMDLEN ] =
      {        0x28,/* command */
                  0,/* lun/reserved */
                  0,/* lba */
                  0,/* reserved */
                  0,/* transfer length */
     READ_REPLY_LEN,/* transfer length */
                  0 };/* reserved/flag/link */
  memset(Readbuffer,sizeof(Readbuffer));
  memcpy( cmd + SCSI_OFF,cmdblk,sizeof(cmdblk) );

  /*
   * +------------------+
   * | struct sg_header | <- cmd
   * +------------------+
   * | copy of cmdblk   | <- cmd + SCSI_OFF
   * +------------------+
   */

  if (handle_scsi_cmd(sizeof(cmdblk),cmd,sizeof(Readbuffer) - SCSI_OFF,Readbuffer )) {
      fprintf( stderr,"read Failed\n" );
      exit(2);
  }
  hex_dump(Readbuffer,sizeof(Readbuffer));
}

这是我的scsi写道:

void scsi_write ( void )
{
  unsigned char Writebuffer[SCSI_OFF];
  unsigned char cmdblk [] =
      {        0x2A,/* 0: command */
                  0,/* 1: lun/reserved */
                  0,/* 2: LBA */
                  0,/* 3: LBA */
                  0,/* 4: LBA */
                  0,/* 5: LBA */
                  0,/* 6: reserved */
                  0,/* 7: transfer length */
                  0,/* 8: transfer length */
                  0 };/* 9: control */

  memset(Writebuffer,sizeof(Writebuffer));
  memcpy( cmd + SCSI_OFF,sizeof(cmdblk) );
  cmd[SCSI_OFF+sizeof(cmdblk)+0] = 'A';
  cmd[SCSI_OFF+sizeof(cmdblk)+1] = 'b';
  cmd[SCSI_OFF+sizeof(cmdblk)+2] = 'c';
  cmd[SCSI_OFF+sizeof(cmdblk)+3] = 'd';
  cmd[SCSI_OFF+sizeof(cmdblk)+4] = 'e';
  cmd[SCSI_OFF+sizeof(cmdblk)+5] = 'f';
  cmd[SCSI_OFF+sizeof(cmdblk)+6] = 'g';
  cmd[SCSI_OFF+sizeof(cmdblk)+7] = 0;
  /*
   * +------------------+
   * | struct sg_header | <- cmd
   * +------------------+
   * | copy of cmdblk   | <- cmd + SCSI_OFF
   * +------------------+
   * | data to write    | 
   * +------------------+
   */

  if (handle_scsi_cmd(sizeof(cmdblk),8,sizeof(Writebuffer) - SCSI_OFF,Writebuffer )) {
      fprintf( stderr,"write Failed\n" );
      exit(2);
  }
}

在下面的例子中我做了

> scsi阅读
> scsi写道
> scsi阅读

然后我打印写入的数据的十六进制(scsi写入)和读取的内容(scsi读取)

Read(10)
[0000]   00 00 00 44 00 00 00 44   00 00 00 00 00 00 00 00   ...D...D ........
[0010]   00 2C 00 00 00 00 00 00   00 00 00 00 00 00 00 00   ........ ........
[0020]   00 00 00 00 00 00 00 00   00 00 00 00 00 00 00 00   ........ ........
[0030]   00 00 00 00 00 00 00 00   00 00 00 00 00 00 00 00   ........ ........
[0040]   00 00 00 00                                         ....

Write(10):
[0000]   00 00 00 00 00 00 00 24   00 00 00 00 00 00 00 00   ........ ........
[0010]   00 00 00 00 00 00 00 00   00 00 00 00 00 00 00 00   ........ ........
[0020]   00 00 00 00 2A 00 00 00   00 00 00 00 00 00 41 62   ........ ......Ab
[0030]   63 64 65 66 67 00                                   cdefg.

Read(10):
[0000]   00 00 00 44 00 00 00 44   00 00 00 00 00 00 00 00   ...D...D ........
[0010]   04 00 20 00 70 00 02 00   00 00 00 0A 00 00 00 00   ....p... ........
[0020]   04 00 00 00 41 62 63 64   65 66 67 00 00 00 00 00   ....Abcd efg.....
[0030]   00 00 00 00 00 00 00 00   00 00 00 00 00 00 00 00   ........ ........
[0040]   00 00 00 00                                         ....

再次运行三个命令,我应该在第一次读取时阅读Abcdefg.对?但是再次运行它们不会改变任你现在可以假设,我使用的内存仍然是以前功能的数据,但即使我在sys_read()发生之前运行memset(Readbuff,sizeof(Readbuff)),我也会得到相同的结果.

我假设,我尝试写的LBA可能被禁止写,我读了缓存.但是,从0x00-0xFF对LBA地址进行交互不会改变任何东西 – 这意味着,我读取了相同的数据(Abcdefg).

您是否知道使用scsi通用接口进行scsi读取或写入的示例实现?

最佳答案
在SCSI中,LBA的单位和传输长度是块,有时称为扇区.这几乎总是512字节.因此,您不能只读取或写入32个字节.至少,你必须做512字节==一个块.这一点是您需要修复的大部分内容.

您的scsi_write实现中的传输长度为零,因此它实际上不会写入任何数据.

您应该为CDB和写/读数据使用不同的缓冲区.我怀疑关于这些缓冲区的混淆导致你的实现写入你的一个静态分配的数组和你的ReadBuffer的末尾.在valgrind下运行它,看看会出现什么.

最后,在handle_scsi_cmd中的任何内容都可能出错.设置数据传输可能很棘手…特别是,确保您直接在I / O头的dxfer_direction中以哪种方式传输数据:SG_DXFER_TO_DEV用于写入,SG_DXFER_FROM_DEV用于读取.

看看这个如何进行读取的例子(16).这更像是你想要完成的事情.

http://fossies.org/linux/misc/sg3_utils-1.33.tgz:a/sg3_utils-1.33/examples/sg_simple16.c

原文链接:https://www.f2er.com/linux/440961.html

猜你在找的Linux相关文章