linux – 硬重置链接异常Emask 0x50 SAct 0x0 SErr 0x4090800动作0xe冻结

以下情况：

带内核的高效linux debian 7服务器
3.2.0-4-amd64#1 SMP Debian 3.2.68-1 deb7u2 x86_64 GNU / Linux

制造商：Supermicro
产品名称：X10SLL-F
版本：1.02

SATA控制器：英特尔公司Lynx Point 6端口SATA控制器1 [AHCI模式](转速04)

2x SSD,2x硬盘

每个驱动器都可以做Sata Rev3(6.0Gb / s)

hdparm -I /dev/sd[a-d]|egrep "Model|speed|Transport"
    Model Number:       TOSHIBA THNSNH128GBST                   
    Transport:          Serial,ATA8-AST,SATA 1.0a,SATA II Extensions,SATA Rev 2.5,SATA Rev 2.6,SATA Rev 3.0
       *    Gen1 signaling speed (1.5Gb/s)
       *    Gen2 signaling speed (3.0Gb/s)
       *    Gen3 signaling speed (6.0Gb/s)
       *    SMART Command Transport (SCT) feature set
    Model Number:       TOSHIBA THNSNH128GBST                   
    Transport:          Serial,SATA Rev 3.0
       *    Gen1 signaling speed (1.5Gb/s)
       *    Gen2 signaling speed (3.0Gb/s)
       *    Gen3 signaling speed (6.0Gb/s)
       *    SMART Command Transport (SCT) feature set
    Model Number:       ST2000VX000-1CU164                      
    Transport:          Serial,SATA Rev 3.0
       *    Gen1 signaling speed (1.5Gb/s)
       *    Gen2 signaling speed (3.0Gb/s)
       *    Gen3 signaling speed (6.0Gb/s)
       *    SMART Command Transport (SCT) feature set

内核消息(至少对我来说)建议所有4个驱动器都存在问题,这让我相信它是可能有问题的SATA控制器.

ata1: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata1: irq_stat 0x00400040,connection status changed
ata1: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata1: hard resetting link
ata2: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata2: irq_stat 0x00400040,connection status changed
ata2: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata2: hard resetting link
ata4: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata4: irq_stat 0x00400040,connection status changed
ata4: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata4: hard resetting link
ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata3: irq_stat 0x00400040,connection status changed
ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: configured for UDMA/33
ata2: EH complete
ata1.00: configured for UDMA/33
ata1: EH complete
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/33
ata3: EH complete
ata4.00: configured for UDMA/33
ata4: EH complete

我已经弄清楚了什么(或者相信已经弄明白了)

命令SECURITY FREEZE LOCK和DEVICE CONFIGURATION OVERLAY对此问题并不重要.

在阅读大约20个bug报告和大量文档时,一些链接的人建议禁用NCQ,我做了.

首先是一个设备,等待1天后检查错误是否重复它再次发生,我为所有4个设备禁用它

echo "1" >/sys/block/sdc/device/queue_depth

情况没有明显变化.

https://ata.wiki.kernel.org/index.php/Libata_error_messages

https://wiki.archlinux.org/index.php/Solid_State_Drives#Resolving_NCQ_errors

其他人建议使用sata电缆,甚至是电路板驱动器之间不兼容.

然而,因为我似乎要么在一个驱动器上有问题,这填充到所有4个,或直接在所有4个设备上问题我无法进一步查明问题.

因为这是一个生产服务器,可以将此服务器放下来进行维护(也就是bios /内核参数更改),但我想尽可能防止这种情况发生.

据主持人说,这可能与电源管理有关：

https://bugzilla.kernel.org/show_bug.cgi?id=74961
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1318218

echo "medium_power" >/sys/class/scsi_host/host0/link_power_management_policy

在更改之前,这被设置为max_performance.

这也没有帮助.

HDD / SDD的智能值是可以的,没什么太明显的.

请注意,UDMA值现在似乎只有33.

在启动服务器时,这是sata链接速度值：

[    3.161850] ata6: SATA link down (SStatus 0 SControl 300)
[    3.161867] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.161882] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.161894] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.161907] ata5: SATA link down (SStatus 0 SControl 300)

这种情况可能只发生在HDD的高负载上,我没有测试,因为它会明显影响服务器性能.

SSD上没有负载,它们已安装但未被任何进程使用.

据我所知,RAM是ECC.

dmidecode -t 17
# dmidecode 2.11
SMBIOS 2.7 present.

Handle 0x0023,DMI type 17,34 bytes
Memory Device
    Array Handle: 0x0022
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: 8192 MB
    Form Factor: DIMM
    Set: None
    Locator: P1-DIMMA1
    Bank Locator: P0_Node0_Channel0_Dimm0
    Type: DDR3
    Type Detail: Synchronous
    Speed: 1600 MHz
    Manufacturer: Samsung
    Serial Number: 373A6427
    Asset Tag: 9876543210
    Part Number: M391B1G73QH0-CK0  
    Rank: 2
    Configured Clock Speed: 1600 MHz

如果我能提供额外的信息,请告诉我,因为我缺乏想法下一步该做什么.

解决方法

服务器体验的基本上是在与驱动器通信出现问题后,以较低的链接速度进行SATA重新协商.

这些因素可以在这里起作用(按概率排序)

>非常高延迟的IOPS操作(例如：由SSD控制器的垃圾收集引起)导致SATA命令超时.您的驱动器是否支持SATA Trim命令？如果是这样,请尝试运行fstrim /.它有什么改变吗？>主板/内存不良：您的内存是否受ECC保护？如果没有,如果可以的话,运行一个延长的(2小时)memtest86测试会话>硬件/软件驱动程序不兼容>糟糕的SATA控制器：虽然不太可能,但您无法完全排除它>坏的SATA电缆/驱动器：由于所有四个驱动器都会给您带来问题,因此这种可能性很小

原文链接：https://www.f2er.com/linux/402001.html

linux – 硬重置链接异常Emask 0x50 SAct 0x0 SErr 0x4090800动作0xe冻结

解决方法

猜你在找的Linux相关文章