交换机链路聚合

前端之家收集整理的这篇文章主要介绍了交换机链路聚合前端之家小编觉得挺不错的,现在分享给大家,也给大家做个参考。


SWA交换机配置内容

Switch>en
Switch>enable
Switch#conf
Switch#configure
Configuring from terminal,memory,or network [terminal]?
Enter configuration commands,one per line. End with CNTL/Z.
Switch(config)#h
Switch(config)#hostname SWA
SWA(config)#in vl
SWA(config)#in vlan 1
SWA(config-if)#ip add 192.168.1.101 255.255.255.0
SWA(config-if)#no shu
SWA(config-if)#no shutdown

%LINK-5-CHANGED: Interface Vlan1,changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1,changed state to up

SWA(config-if)#ex
SWA(config)#sp
SWA(config)#spanning-tree m
SWA(config)#spanning-tree mode r
SWA(config)#spanning-tree mode rapid-pvst
SWA(config)#in f0/1
SWA(config-if)#channel-g
SWA(config-if)#channel-group 1 m
SWA(config-if)#channel-group 1 mode d
SWA(config-if)#channel-group 1 mode desirable

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1,changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1,changed state to up
SWA(config-if)#ex
SWA(config)#in f0/2
SWA(config-if)#channel-g
SWA(config-if)#channel-group 1 m
SWA(config-if)#channel-group 1 mode d
SWA(config-if)#channel-group 1 mode desirable

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2,changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2,changed state to up
SWA(config-if)#ex
SWA(config)#

SWB交换机配置内容

Switch>en
Switch>enable
Switch#conf
Switch#configure
Configuring from terminal,one per line. End with CNTL/Z.
Switch(config)#h
Switch(config)#hostname SWB
SWB(config)#in vl
SWB(config)#in vlan 1
SWB(config-if)#ip add 192.168.1.102 255.255.255.0
SWB(config-if)#no shu
SWB(config-if)#no shutdown

%LINK-5-CHANGED: Interface Vlan1,changed state to up

SWB(config-if)#ex
SWB(config)#sp
SWB(config)#spanning-tree m
SWB(config)#spanning-tree mode
SWB(config)#spanning-tree mode r
SWB(config)#spanning-tree mode rapid-pvst
SWB(config)#in f0/1
SWB(config-if)#channel-g
SWB(config-if)#channel-group 1 m
SWB(config-if)#channel-group 1 mode d
SWB(config-if)#channel-group 1 mode desirable

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1,changed state to up
SWB(config-if)#
%LINK-5-CHANGED: Interface Port-channel 1,changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel 1,changed state to up

SWB(config-if)#ex
SWB(config)#in f0/2
SWB(config-if)#channel-g
SWB(config-if)#channel-group 1 m
SWB(config-if)#channel-group 1 mode d
SWB(config-if)#channel-group 1 mode desirable

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2,changed state to up SWB(config-if)#ex SWB(config)#

原文链接:https://www.f2er.com/javaschema/286508.html

猜你在找的设计模式相关文章