日志管理工具总览
先看看 推荐！国外程序员整理的系统管理员资源大全 中，国外程序员整理的日志聚合工具的列表：
日志管理工具：收集，解析，可视化
- Elasticsearch - 一个基于Lucene的文档存储，主要用于日志索引、存储和分析。
- Fluentd - 日志收集和发出
- Flume -分布式日志收集和聚合系统
- Graylog2 -具有报警选项的可插入日志和事件分析服务器
- Heka -流处理系统，可用于日志聚合
- Kibana - 可视化日志和时间戳数据
- Logstash -管理事件和日志的工具
- Octopussy -日志管理解决方案（可视化/报警/报告）
Graylog与ELK方案的对比
- ELK： Logstash -> Elasticsearch -> Kibana
- Graylog： Graylog Collector -> Graylog Server(封装Elasticsearch) -> Graylog Web
之前试过Flunted + Elasticsearch + Kibana的方案，发现有几个缺点：
- 不能处理多行日志，比如MysqL慢查询，Tomcat/Jetty应用的Java异常打印
- 不能保留原始日志，只能把原始日志分字段保存，这样搜索日志结果是一堆Json格式文本，无法阅读。
- 不复合正则表达式匹配的日志行，被全部丢弃。
本着解决以上3个缺点的原则，再次寻找替代方案。 首先找到了商业日志工具Splunk，号称日志界的Google，意思是全文搜索日志的能力，不光能解决以上3个缺点，还提供搜索单词高亮显示，不同错误级别日志标色等吸引人的特性，但是免费版有500M限制，付费版据说要3万美刀，只能放弃，继续寻找。 最后找到了Graylog，第一眼看到Graylog，只是系统日志syslog的采集工具，一点也没吸引到我。但后来深入了解后，才发现Graylog简直就是开源版的Splunk。 我自己总结的Graylog吸引人的地方：
- 一体化方案，安装方便，不像ELK有3个独立系统间的集成问题。
- 采集原始日志，并可以事后再添加字段，比如http_status_code，response_time等等。
- 自己开发采集日志的脚本，并用curl/nc发送到Graylog Server，发送格式是自定义的GELF，Flunted和Logstash都有相应的输出GELF消息的插件。自己开发带来很大的自由度。实际上只需要用inotifywait监控日志的modify事件，并把日志的新增行用curl/netcat发送到Graylog Server就可。
- 搜索结果高亮显示，就像google一样。
- 搜索语法简单，比如：
source:mongo AND reponse_time_ms:>5000，避免直接输入elasticsearch搜索json语法 - 搜索条件可以导出为elasticsearch的搜索json文本，方便直接开发调用elasticsearch rest api的搜索脚本。
Graylog图解
Graylog开源版官网： https://www.graylog.org/
来几张官网的截图：
1.架构图
2.屏幕截图
3.部署图
最小安装：
生产环境安装：
Graylog服务器安装
- mongodb
- elasticsearch
- graylog-server
- graylog-web
以下环境是CentOS 6.6，服务器ip是10.0.0.11，已安装jre-1.7.0-openjdk
- mongodb
http://docs.mongodb.org/manual/tutorial/install-mongodb-on-red-hat
[root@logserver yum.repos.d]# vim /etc/yum.repos.d/mongodb-org-3.0.repo --- [mongodb-org-3.0] name=MongoDB Repository baseurl=http://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/3.0/x86_64/ gpgcheck=0 enabled=1 --- [root@logserver yum.repos.d]# yum install -y mongodb-org [root@logserver yum.repos.d]# vi /etc/yum.conf 最后一行添加： --- exclude=mongodb-org,mongodb-org-server,mongodb-org-shell,mongodb-org-mongos,mongodb-org-tools --- [root@logserver yum.repos.d]# service mongod start [root@logserver yum.repos.d]# chkconfig mongod on [root@logserver yum.repos.d]# vi /etc/security/limits.conf 最后一行添加： --- * soft nproc 65536 * hard nproc 65536 mongod soft nproc 65536 * soft nofile 131072 * hard nofile 131072 --- [root@logserver ~]# vi /etc/init.d/mongod ulimit -f unlimited 行前插入： --- if test -f /sys/kernel/mm/transparent_hugepage/enabled; then echo never > /sys/kernel/mm/transparent_hugepage/enabled fi if test -f /sys/kernel/mm/transparent_hugepage/defrag; then echo never > /sys/kernel/mm/transparent_hugepage/defrag fi --- [root@logserver ~]# /etc/init.d/mongod restart
- elasticsearch
Elasticsearch的最新版是1.6.0
https://www.elastic.co/guide/en/elasticsearch/reference/current/setup-repositories.html
[root@logserver ~]# rpm --import https://packages.elastic.co/GPG-KEY-elasticsearch [root@logserver ~]# vi /etc/yum.repos.d/elasticsearch.repo --- [elasticsearch-1.5] name=Elasticsearch repository for 1.5.x packages baseurl=http://packages.elastic.co/elasticsearch/1.5/centos gpgcheck=1 gpgkey=http://packages.elastic.co/GPG-KEY-elasticsearch enabled=1 --- [root@logserver ~]# yum install elasticsearch [root@logserver ~]# chkconfig --add elasticsearch [root@logserver ~]# vi /etc/elasticsearch/elasticsearch.yml 32 cluster.name: graylog [root@logserver ~]# /etc/init.d/elasticsearch start [root@logserver ~]# curl localhost:9200
- graylog
Graylog的最新版是1.1.4，下载链接如下：
https://packages.graylog2.org/repo/el/6Server/1.1/x86_64/graylog-server-1.1.4-1.noarch.rpm
https://packages.graylog2.org/repo/el/6Server/1.1/x86_64/graylog-web-1.1.4-1.noarch.rpm
[root@logserver ~]# wget https://packages.graylog2.org/repo/el/6Server/1.0/x86_64/graylog-server-1.0.2-1.noarch.rpm [root@logserver ~]# wget https://packages.graylog2.org/repo/el/6Server/1.0/x86_64/graylog-web-1.0.2-1.noarch.rpm [root@logserver ~]# rpm -ivh graylog-server-1.0.2-1.noarch.rpm [root@logserver ~]# rpm -ivh graylog-web-1.0.2-1.noarch.rpm [root@logserver ~]# /etc/init.d/graylog-server start Starting graylog-server: [确定] 启动失败！ [root@logserver ~]# cat /var/log/graylog-server/server.log 2015-05-22T15:53:14.962+08:00 INFO [CmdLineTool] Loaded plugins: [] 2015-05-22T15:53:15.032+08:00 ERROR [Server] No password secret set. Please define password_secret in your graylog2.conf. 2015-05-22T15:53:15.033+08:00 ERROR [CmdLineTool] Validating configuration file Failed - exiting. [root@logserver ~]# yum install pwgen [root@logserver ~]# pwgen -N 1 -s 96 zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz [root@logserver ~]# echo -n 123456 | sha256sum xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx - [root@logserver ~]# vi /etc/graylog/server/server.conf 11 password_secret = zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz ... 22 root_password_sha2 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ... 152 elasticsearch_cluster_name = graylog [root@logserver ~]# /etc/init.d/graylog-server restart 启动成功！ [root@logserver ~]# /etc/init.d/graylog-web start Starting graylog-web: [确定] 启动失败！ [root@logserver ~]# cat /var/log/graylog-web/application.log 2015-05-22T15:53:22.960+08:00 - [ERROR] - from lib.Global in main Please configure application.secret in your conf/graylog-web-interface.conf 2015-05-22T16:25:55.343+08:00 - [ERROR] - from lib.Global in main Please configure application.secret in your conf/graylog-web-interface.conf [root@logserver ~]# pwgen -N 1 -s 96 yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy [root@logserver ~]# vi /etc/graylog/web/web.conf --- 2 graylog2-server.uris="http://127.0.0.1:12900/" 12 application.secret="yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy" --- 注意：/etc/graylog/web/web.conf中的graylog2-server.uris值必须与/etc/graylog/server/server.conf中的rest_listen_uri一致 --- 36 rest_listen_uri = http://127.0.0.1:12900/ --- [root@logserver ~]# /etc/init.d/graylog-web restart
浏览器中输入url: http://10.0.0.11:9000/ 可以进入graylog登录页， 管理员帐号/密码： admin/123456
- 添加日志收集器
以admin登录http://10.0.0.11:9000/
4.1 进入 System > Inputs > Inputs in Cluster > Raw/Plaintext TCP | Launch new input 取名"tcp 5555" 完成创建
任何安装nc的Linux机器上执行：
echo `date` | nc 10.0.0.11 5555
浏览器的http://10.0.0.11:9000/登录后首页，点击第三行绿色搜索按钮，看到一条新消息：
Timestamp Source Message 2015-05-22 08:49:15.280 10.0.0.157 2015年 05月 22日 星期五 16:48:28 CST
说明安装已成功！！
4.2 进入 System > Inputs > Inputs in Cluster > GELF HTTP | Launch new input 取名"http 12201" 完成创建 任何安装curl的Linux机器上执行：
curl -XPOST http://10.0.0.11:12201/gelf -p0 -d '{"short_message":"Hello there","host":"example.org","facility":"test","_foo":"bar"}'
浏览器的http://10.0.0.11:9000/登录后首页，点击第三行绿色搜索按钮，看到一条新消息：
Timestamp Source Message 2015-05-22 08:49:15.280 10.0.0.157 Hello there
说明GELF HTTP Input设置成功！！
- 时区和高亮设置
admin帐号的时区：
[root@logserver ~]# vi /etc/graylog/server/server.conf --- 30 root_timezone = Asia/Shanghai --- [root@logserver ~]# /etc/init.d/graylog-server restart
其他帐号的默认时区：
[root@logserver ~]# vi /etc/graylog/web/web.conf --- 18 timezone="Asia/Shanghai" --- [root@logserver ~]# /etc/init.d/graylog-web restart
允许查询结果高亮：
[root@logserver ~]# vi /etc/graylog/server/server.conf --- 147 allow_highlighting = true --- [root@logserver ~]# /etc/init.d/graylog-server restart
- 修改css颜色补充
[root@logserver ~]# cp /usr/share/graylog-web/lib/graylog-web-interface.graylog-web-interface-1.1.4-assets.jar . [root@logserver ~]# mkdir jar_tmp [root@logserver ~]# cd jar_tmp [root@logserver ~]# jar_tmp]$ jar xvf ../graylog-web-interface.graylog-web-interface-1.1.4-assets.jar [root@logserver ~]# jar_tmp]$ vi public/stylesheets/graylog2.less --- 2347 font-family: monospace; 2348 color: #16ace3; -> 2347 /*font-family: monospace;*/ 2348 /*color: #16ace3;*/ --- [root@logserver ~]# jar_tmp]$ jar cvfm graylog-web-interface.graylog-web-interface-1.1.4-assets.jar Meta-INF/MANIFEST.MF . [root@logserver ~]# sudo /etc/init.d/graylog-web stop [root@logserver ~]# cd /usr/share/graylog-web/lib/ [root@logserver ~]# lib]$ sudo mv graylog-web-interface.graylog-web-interface-1.1.4-assets.jar graylog-web-interface.graylog-web-interface-1.1.4-assets.jar.origin [root@logserver ~]# lib]$ sudo cp ~/jar_tmp/graylog-web-interface.graylog-web-interface-1.1.4-assets.jar . [root@logserver ~]# lib]$ sudo /etc/init.d/graylog-web start
- 移动数据目录
移动elasticsearch的数据目录 [root@logserver ~]# sudo /etc/init.d/elasticsearch stop [root@logserver ~]# sudo cp -rp /var/lib/elasticsearch/ /data/ [root@logserver ~]# sudo vi /etc/sysconfig/elasticsearch +16 DATA_DIR=/data/elasticsearch [root@logserver ~]# sudo /etc/init.d/elasticsearch start 移动mongo的数据目录 [root@logserver ~]# sudo /etc/init.d/mongod stop [root@logserver ~]# sudo cp -rp /var/lib/mongo /data/ [root@logserver ~]# sudo vi /etc/mongod.conf --- 13 dbpath=/var/lib/mongo -> 13 dbpath=/data/mongo --- [mtagent@access2 ~]$ sudo /etc/init.d/mongod start
发送日志到Graylog服务器
使用http协议发送：
http://docs.graylog.org/en/1.1/pages/sending_data.html#gelf-via-http
curl -XPOST http://graylog.example.org:12202/gelf -p0 -d '{"short_message":"Hello there","_foo":"bar"}'
使用tcp协议发送
http://docs.graylog.org/en/1.1/pages/sending_data.html#raw-plaintext-inputs
echo "hello,graylog" | nc graylog.example.org 5555
结合inotifywait收集Nginx日志
gather-Nginx-log.sh
#!/bin/bash app=Nginx node=$HOSTNAME log_file=/var/log/Nginx/Nginx.log graylog_server_ip=10.0.0.11 graylog_server_port=12201 while inotifywait -e modify $log_file; do last_size=`cat ${app}.size` curr_size=`stat -c%s $log_file` echo $curr_size > ${app}.size count=`echo "$curr_size-$last_size" | bc` python read_log.py $log_file ${last_size} $count | sed 's/"/\\\\\"/g' > ${app}.new_lines while read line do if echo "$line" | grep "^20[0-9][0-9]-[0-1][0-9]-[0-3][0-9]" > /dev/null; then seconds=`echo "$line" | cut -d ' ' -f 6` spend_ms=`echo "${seconds}*1000/1" | bc` http_status=`echo "$line" | cut -d ' ' -f 2` echo "http_status -- $http_status" prefix_number=${http_status:0:1} if [ "$prefix_number" == "5" ]; then level=3 #ERROR elif [ "$prefix_number" == "4" ]; then level=4 #WARNING elif [ "$prefix_number" == "3" ]; then level=5 #NOTICE elif [ "$prefix_number" == "2" ]; then level=6 #INFO elif [ "$prefix_number" == "1" ]; then level=7 #DEBUG fi echo "level -- $level" curl -XPOST http://${graylog_server_ip}:${graylog_server_port}/gelf -p0 -d "{\"short_mess sage\":\"$line\",\"host\":\"${app}\",\"level\":${level},\"_node\":\"${node}\",\"_spend_msecs\":$ {spend_ms},\"_http_status\":${http_status}}" echo "gathered -- $line" fi done < ${app}.new_lines done
read_log.py
#!/usr/bin/python #coding=utf-8 import sys import os if len(sys.argv) < 4: print "Usage: %s /path/of/log/file print_from count" % (sys.argv[0]) print "Example: %s /var/log/syslog 90000 100" % (sys.argv[0]) sys.exit(1) filename = sys.argv[1] if (not os.path.isfile(filename)): print "%s not existing!!!" % (filename) sys.exit(1) filesize = os.path.getsize(filename) position = int(sys.argv[2]) if (filesize < position): print "log file may cut by logrotate.d,print log from begin!" % (position,filesize) position = 0 count = int(sys.argv[3]) fo = open(filename,"r") fo.seek(position,0) content = fo.read(count) print content.strip() # Close opened file fo.close()
5秒一次收集iotop日志，找出高速读写磁盘的进程
#!/bin/bash
app=iotop
node=$HOSTNAME
graylog_server_ip=10.0.0.11
graylog_server_port=12201
while true; do
sudo /usr/sbin/iotop -b -o -t -k -q -n2 | sed 's/"/\\\\\"/g' > /dev/shm/graylog_client.${app}.new_lines
while read line; do
if echo "$line" | grep "^[0-2][0-9]:[0-5][0-9]:[0-5][0-9]" > /dev/null; then
read -a WORDS <<< $line
epoch_seconds=`date --date="${WORDS[0]}" +%s.%N`
pid=${WORDS[1]}
read_float_kps=${WORDS[4]}
read_int_kps=${read_float_kps%.*}
write_float_kps=${WORDS[6]}
write_int_kps=${write_float_kps%.*}
command=${WORDS[12]}
if [ "$command" == "bash" ] && (( ${#WORDS[*]} > 13 )); then
pname=${WORDS[13]}
elif [ "$command" == "java" ] && (( ${#WORDS[*]} > 13 )); then
arg0=${WORDS[13]}
pname=${arg0#*=}
else
pname=$command
fi
curl --connect-timeout 1 -s -XPOST http://${graylog_server_ip}:${graylog_server_port}/gelf -p0 -d "{\"timestamp\":$epoch_seconds,\"short_message\":\"${line::200}\",\"full_message\":\"$line\",\"_pid\":${pid},\"_read_kps\":${read_int_kps},\"_write_kps\":${write_int_kps},\"_pname\":\"${pname}\"}"
fi
done < /dev/shm/graylog_client.${app}.new_lines
sleep 4
done
收集android app日志
device.env
export device=4b13c85c export app=com.tencent.mm export filter="\( I/ServerAsyncTask2(\| W/\| E/\)" export graylog_server_ip=10.0.0.11 export graylog_server_port=12201
adblog.sh
#!/bin/bash . ./device.env adb -s $device logcat -v time *:I | tee -a adb.log
ga-androidapp-log.sh
#!/bin/bash
. ./device.env
log_file=./adb.log
node=$device
if [ ! -f $log_file ]; then
echo $log_file not exist!!
echo 0 > ${app}.size
exit 1
fi
if [ ! -f ${app}.size ]; then
curr_size=`stat -c%s $log_file`
echo $curr_size > ${app}.size
fi
while inotifywait -qe modify $log_file > /dev/null; do
last_size=`cat ${app}.size`
curr_size=`stat -c%s $log_file`
echo $curr_size > ${app}.size
pids=`./getpids.py $app $device`
if [ "$pids" == "" ]; then
continue
fi
count=`echo "$curr_size-$last_size" | bc`
python read_log.py $log_file ${last_size} $count | grep "$pids" | sed 's/"/\\\\\"/g' | sed 's/\t/ /g' > ${app}.new_lines
#echo "${app}.new_lines lines: `wc -l ${app}.new_lines`"
while read line
do
if echo "$line" | grep "$filter" > /dev/null; then
priority=${line:19:1}
if [ "$priority" == "F" ]; then
level=1 #ALERT
elif [ "$priority" == "E" ]; then
level=3 #ERROR
elif [ "$priority" == "W" ]; then
level=4 #WARNING
elif [ "$priority" == "I" ]; then
level=6 #INFO
fi
#echo "level -- $level"
curl -XPOST http://${graylog_server_ip}:${graylog_server_port}/gelf -p0 -d "{\"short_message\":\"$line\",\"_node\":\"${node}\"}"
echo "GATHERED -- $line"
#else
#echo "ignored -- $line"
fi
done < ${app}.new_lines
done
get_pids.py
#!/usr/bin/python
import sys
import os
import commands
if __name__ == "__main__":
if len(sys.argv) != 3:
print sys.argv[0]+" packageName device"
sys.exit()
device = sys.argv[2]
cmd = "adb -s "+device+" shell ps | grep "+sys.argv[1]+" | cut -c11-15"
output = commands.getoutput(cmd)
if output == "":
sys.exit()
originpids = output.split("\n")
strippids = map((lambda pid: int(pid,10)),originpids)
pids = map((lambda pid: "%5d" %pid),strippids)
pattern = "\(("+")\|(".join(pids)+")\)"
print pattern
graylog启动脚本
[root@logserver init.d]$ cat /etc/init.d/graylog-server #! /bin/sh # # graylog-server Starts/stop the "graylog-server" daemon # # chkconfig: - 95 5 # description: Runs the graylog-server daemon ### BEGIN INIT INFO # Provides: graylog-server # required-Start: $network $named $remote_fs $syslog # required-Stop: $network $named $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Graylog Server # Description: Graylog Server - Search your logs,create charts,send reports and be alerted when something happens. ### END INIT INFO # Author: Lee Briggs <lee@leebriggs.co.uk> # Contributor: Sandro Roth <sandro.roth@gmail.com> # Contributor: Bernd Ahlers <bernd@torch.sh> # Source function library. . /etc/rc.d/init.d/functions RETVAL=0 PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DESC="Graylog Server" NAME=graylog-server JAR_FILE=/usr/share/graylog-server/graylog.jar JAVA=/usr/bin/java PID_DIR=/var/run/graylog-server PID_FILE=$PID_DIR/$NAME.pid JAVA_ARGS="-jar -Djava.library.path=/usr/share/graylog-server/lib/sigar -Dlog4j.configuration=file:///etc/graylog/server/log4j.xml $JAR_FILE server -p $PID_FILE -f /etc/graylog/server/server.conf" SCRIPTNAME=/etc/init.d/$NAME LOCKFILE=/var/lock/subsys/$NAME GRAYLOG_SERVER_USER=graylog GRAYLOG_SERVER_JAVA_OPTS="" # Pull in sysconfig settings [ -f /etc/sysconfig/${NAME} ] && . /etc/sysconfig/${NAME} # Exit if the package is not installed [ -e "$JAR_FILE" ] || exit 0 [ -x "$JAVA" ] || exit 0 start() { echo -n $"Starting ${NAME}: " install -d -m 755 -o $GRAYLOG_SERVER_USER -g $GRAYLOG_SERVER_USER -d $PID_DIR daemon --check $JAVA --pidfile=${PID_FILE} --user=${GRAYLOG_SERVER_USER} \ "$GRAYLOG_COMMAND_WRAPPER $JAVA $GRAYLOG_SERVER_JAVA_OPTS $JAVA_ARGS $GRAYLOG_SERVER_ARGS &" RETVAL=$? sleep 2 [ $RETVAL = 0 ] && touch ${LOCKFILE} echo return $RETVAL } stop() { echo -n $"Stopping ${NAME}: " killproc -p ${PID_FILE} -d 10 $JAVA RETVAL=$? [ $RETVAL = 0 ] && rm -f ${PID_FILE} && rm -f ${LOCKFILE} echo return $RETVAL } case "$1" in start) start ;; stop) stop ;; status) status -p ${PID_FILE} $NAME RETVAL=$? ;; restart|force-reload) stop start ;; *) N=/etc/init.d/${NAME} echo "Usage: $N {start|stop|status|restart|force-reload}" >&2 RETVAL=2 ;; esac exit $RETVAL
[root@logserver init.d]$ cat /etc/init.d/graylog-web #! /bin/sh # # graylog-web Starts/stop the "graylog-web" application # # chkconfig: - 99 1 # description: Runs the graylog-web application ### BEGIN INIT INFO # Provides: graylog-web # required-Start: $network $named $remote_fs $syslog # required-Stop: $network $named $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Graylog Web # Description: Graylog Web - Search your logs,send reports and be alerted when something happens. ### END INIT INFO # Author: Lee Briggs <lee@leebriggs.co.uk> # Contributor: Bernd Ahlers <bernd@torch.sh> # Some default settings. GRAYLOG_WEB_HTTP_ADDRESS="0.0.0.0" GRAYLOG_WEB_HTTP_PORT="9000" GRAYLOG_WEB_USER="graylog-web" # Source function library. . /etc/rc.d/init.d/functions RETVAL=0 PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DESC="Graylog Web" NAME=graylog-web CMD=/usr/share/graylog-web/bin/graylog-web-interface PID_FILE=/var/lib/graylog-web/application.pid CONF_FILE=/etc/graylog/web/web.conf SCRIPTNAME=/etc/init.d/$NAME LOCKFILE=/var/lock/subsys/$NAME RUN=yes # Pull in sysconfig settings [ -f /etc/sysconfig/graylog-web ] && . /etc/sysconfig/graylog-web # Exit if the package is not installed [ -e "$CMD" ] || exit 0 start() { echo -n $"Starting ${NAME}: " daemon --user=$GRAYLOG_WEB_USER --pidfile=${PID_FILE} \ "nohup $GRAYLOG_COMMAND_WRAPPER $CMD -Dconfig.file=${CONF_FILE} \ -Dlogger.file=/etc/graylog/web/logback.xml \ -Dpidfile.path=$PID_FILE \ -Dhttp.address=$GRAYLOG_WEB_HTTP_ADDRESS \ -Dhttp.port=$GRAYLOG_WEB_HTTP_PORT \ $GRAYLOG_WEB_JAVA_OPTS $GRAYLOG_WEB_ARGS > /var/log/graylog-web/console.log 2>&1 &" RETVAL=$? sleep 2 [ $RETVAL = 0 ] && touch ${LOCKFILE} echo return $RETVAL } stop() { echo -n $"Stopping ${NAME}: " killproc -p ${PID_FILE} -d 10 $CMD RETVAL=$? [ $RETVAL = 0 ] && rm -f ${PID_FILE} && rm -f ${LOCKFILE} echo return $RETVAL } case "$1" in start) start ;; stop) stop ;; status) status -p ${PID_FILE} $NAME RETVAL=$? ;; restart|force-reload) stop start ;; *) N=/etc/init.d/${NAME} echo "Usage: $N {start|stop|status|restart|force-reload}" >&2 RETVAL=2 ;; esac exit $RETVAL
[root@logserver init.d]$ cat /etc/graylog/server/
log4j.xml node-id server.conf
[root@logserver init.d]$ cat /etc/graylog/server/server.conf
# If you are running more than one instances of graylog2-server you have to select one of these
# instances as master. The master will perform some periodical tasks that non-masters won't perform.
is_master = true
# The auto-generated node ID will be stored in this file and read after restarts. It is a good idea
# to use an absolute file path here if you are starting graylog2-server from init scripts or similar.
node_id_file = /etc/graylog/server/node-id
# You MUST set a secret to secure/pepper the stored user passwords here. Use at least 64 characters.
# Generate one by using for example: pwgen -N 1 -s 96
password_secret = Us5hAey50eHzfJSqrnhUnLv8k8I2QV1JbPcNLVRtZ2lZdLF9b5G2jSYflZMc41IaoD4BEH59Zi9Gkplq0nhWvtxUrLFjsyqe
# The default root user is named 'admin'
#root_username = admin
# You MUST specify a hash password for the root user (which you only need to initially set up the
# system and in case you lose connectivity to your authentication backend)
# This password cannot be changed using the API or via the web interface. If you need to change it,# modify it in this file.
# Create one by using for example: echo -n yourpassword | shasum -a 256
# and put the resulting hash value into the following line
root_password_sha2 = 554752816c3d52806a0cf8b81c8c32533bd4648eda8401dc90369225f1938b6c
# The email address of the root user.
# Default is empty
#root_email = ""
# The time zone setting of the root user.
# Default is UTC
root_timezone = Asia/Shanghai
# Set plugin directory here (relative or absolute)
plugin_dir = /usr/share/graylog-server/plugin
# REST API listen URI. Must be reachable by other graylog2-server nodes if you run a cluster.
rest_listen_uri = http://127.0.0.1:12900/
# REST API transport address. Defaults to the value of rest_listen_uri. Exception: If rest_listen_uri
# is set to a wildcard IP address (0.0.0.0) the first non-loopback IPv4 system address is used.
# If set,his will be promoted in the cluster discovery APIs,so other nodes may try to connect on
# this address and it is used to generate URLs addressing entities in the REST API. (see rest_listen_uri)
# You will need to define this,if your Graylog server is running behind a HTTP proxy that is rewriting
# the scheme,host name or URI.
#rest_transport_uri = http://192.168.1.1:12900/
# Enable CORS headers for REST API. This is necessary for JS-clients accessing the server directly.
# If these are disabled,modern browsers will not be able to retrieve resources from the server.
# This is disabled by default. Uncomment the next line to enable it.
#rest_enable_cors = true
# Enable GZIP support for REST API. This compresses API responses and therefore helps to reduce
# overall round trip times. This is disabled by default. Uncomment the next line to enable it.
#rest_enable_gzip = true
# Enable HTTPS support for the REST API. This secures the communication with the REST API with
# TLS to prevent request forgery and eavesdropping. This is disabled by default. Uncomment the
# next line to enable it.
#rest_enable_tls = true
# The X.509 certificate file to use for securing the REST API.
#rest_tls_cert_file = /path/to/graylog2.crt
# The private key to use for securing the REST API.
#rest_tls_key_file = /path/to/graylog2.key
# The password to unlock the private key used for securing the REST API.
#rest_tls_key_password = secret
# The maximum size of a single HTTP chunk in bytes.
#rest_max_chunk_size = 8192
# The maximum size of the HTTP request headers in bytes.
#rest_max_header_size = 8192
# The maximal length of the initial HTTP/1.1 line in bytes.
#rest_max_initial_line_length = 4096
# The size of the execution handler thread pool used exclusively for serving the REST API.
#rest_thread_pool_size = 16
# The size of the worker thread pool used exclusively for serving the REST API.
#rest_worker_threads_max_pool_size = 16
# Embedded Elasticsearch configuration file
# pay attention to the working directory of the server,maybe use an absolute path here
#elasticsearch_config_file = /etc/graylog/server/elasticsearch.yml
# Graylog will use multiple indices to store documents in. You can configured the strategy it uses to determine
# when to rotate the currently active write index.
# It supports multiple rotation strategies:
# - "count" of messages per index,use elasticsearch_max_docs_per_index below to configure
# - "size" per index,use elasticsearch_max_size_per_index below to configure
# valid values are "count","size" and "time",default is "count"
rotation_strategy = count
# (Approximate) maximum number of documents in an Elasticsearch index before a new index
# is being created,also see no_retention and elasticsearch_max_number_of_indices.
# Configure this if you used 'rotation_strategy = count' above.
elasticsearch_max_docs_per_index = 20000000
# (Approximate) maximum size in bytes per Elasticsearch index on disk before a new index is being created,also see
# no_retention and elasticsearch_max_number_of_indices. Default is 1GB.
# Configure this if you used 'rotation_strategy = size' above.
#elasticsearch_max_size_per_index = 1073741824
# (Approximate) maximum time before a new Elasticsearch index is being created,also see
# no_retention and elasticsearch_max_number_of_indices. Default is 1 day.
# Configure this if you used 'rotation_strategy = time' above.
# Please note that this rotation period does not look at the time specified in the received messages,but is
# using the real clock value to decide when to rotate the index!
# Specify the time using a duration and a suffix indicating which unit you want:
# 1w = 1 week
# 1d = 1 day
# 12h = 12 hours
# Permitted suffixes are: d for day,h for hour,m for minute,s for second.
#elasticsearch_max_time_per_index = 1d
# Disable checking the version of Elasticsearch for being compatible with this Graylog release.
# WARNING: Using Graylog with unsupported and untested versions of Elasticsearch may lead to data loss!
#elasticsearch_disable_version_check = true
# Disable message retention on this node,i. e. disable Elasticsearch index rotation.
#no_retention = false
# How many indices do you want to keep?
elasticsearch_max_number_of_indices = 20
# Decide what happens with the oldest indices when the maximum number of indices is reached.
# The following strategies are availble:
# - delete # Deletes the index completely (Default)
# - close # Closes the index and hides it from the system. Can be re-opened later.
retention_strategy = delete
# How many Elasticsearch shards and replicas should be used per index? Note that this only applies to newly created indices.
elasticsearch_shards = 4
elasticsearch_replicas = 0
# Prefix for all Elasticsearch indices and index aliases managed by Graylog.
elasticsearch_index_prefix = graylog2
# Do you want to allow searches with leading wildcards? This can be extremely resource hungry and should only
# be enabled with care. See also: https://www.graylog.org/documentation/general/queries/
allow_leading_wildcard_searches = false
# Do you want to allow searches to be highlighted? Depending on the size of your messages this can be memory hungry and
# should only be enabled after making sure your Elasticsearch cluster has enough memory.
allow_highlighting = true
# settings to be passed to elasticsearch's client (overriding those in the provided elasticsearch_config_file)
# all these
# this must be the same as for your Elasticsearch cluster
elasticsearch_cluster_name = graylog
# you could also leave this out,but makes it easier to identify the graylog2 client instance
#elasticsearch_node_name = graylog2-server
# we don't want the graylog2 server to store any data,or be master node
#elasticsearch_node_master = false
#elasticsearch_node_data = false
# use a different port if you run multiple Elasticsearch nodes on one machine
#elasticsearch_transport_tcp_port = 9350
# we don't need to run the embedded HTTP server here
#elasticsearch_http_enabled = false
#elasticsearch_discovery_zen_ping_multicast_enabled = false
#elasticsearch_discovery_zen_ping_unicast_hosts = 192.168.1.203:9300
# Change the following setting if you are running into problems with timeouts during Elasticsearch cluster discovery.
# The setting is specified in milliseconds,the default is 5000ms (5 seconds).
#elasticsearch_cluster_discovery_timeout = 5000
# the following settings allow to change the bind addresses for the Elasticsearch client in graylog2
# these settings are empty by default,letting Elasticsearch choose automatically,# override them here or in the 'elasticsearch_config_file' if you need to bind to a special address
# refer to http://www.elasticsearch.org/guide/en/elasticsearch/reference/0.90/modules-network.html
# for special values here
#elasticsearch_network_host =
#elasticsearch_network_bind_host =
#elasticsearch_network_publish_host =
# The total amount of time discovery will look for other Elasticsearch nodes in the cluster
# before giving up and declaring the current node master.
#elasticsearch_discovery_initial_state_timeout = 3s
# Analyzer (tokenizer) to use for message and full_message field. The "standard" filter usually is a good idea.
# All supported analyzers are: standard,simple,whitespace,stop,keyword,pattern,language,snowball,custom
# Elasticsearch documentation: http://www.elasticsearch.org/guide/reference/index-modules/analysis/
# Note that this setting only takes effect on newly created indices.
elasticsearch_analyzer = standard
# Batch size for the Elasticsearch output. This is the maximum (!) number of messages the Elasticsearch output
# module will get at once and write to Elasticsearch in a batch call. If the configured batch size has not been
# reached within output_flush_interval seconds,everything that is available will be flushed at once. Remember
# that every outputbuffer processor manages its own batch and performs its own batch write calls.
# ("outputbuffer_processors" variable)
output_batch_size = 500
# Flush interval (in seconds) for the Elasticsearch output. This is the maximum amount of time between two
# batches of messages written to Elasticsearch. It is only effective at all if your minimum number of messages
# for this time period is less than output_batch_size * outputbuffer_processors.
output_flush_interval = 1
# As stream outputs are loaded only on demand,an output which is failing to initialize will be tried over and
# over again. To prevent this,the following configuration options define after how many faults an output will
# not be tried again for an also configurable amount of seconds.
output_fault_count_threshold = 5
output_fault_penalty_seconds = 30
# The number of parallel running processors.
# Raise this number if your buffers are filling up.
processbuffer_processors = 5
outputbuffer_processors = 3
#outputbuffer_processor_keep_alive_time = 5000
#outputbuffer_processor_threads_core_pool_size = 3
#outputbuffer_processor_threads_max_pool_size = 30
# UDP receive buffer size for all message inputs (e. g. SyslogUDPInput).
#udp_recvbuffer_sizes = 1048576
# Wait strategy describing how buffer processors wait on a cursor sequence. (default: sleeping)
# Possible types:
# - yielding
# Compromise between performance and cpu usage.
# - sleeping
# Compromise between performance and cpu usage. Latency spikes can occur after quiet periods.
# - blocking
# High throughput,low latency,higher cpu usage.
# - busy_spinning
# Avoids syscalls which could introduce latency jitter. Best when threads can be bound to specific cpu cores.
processor_wait_strategy = blocking
# Size of internal ring buffers. Raise this if raising outputbuffer_processors does not help anymore.
# For optimum performance your LogMessage objects in the ring buffer should fit in your cpu L3 cache.
# Start server with --statistics flag to see buffer utilization.
# Must be a power of 2. (512,1024,2048,...)
ring_size = 65536
inputbuffer_ring_size = 65536
inputbuffer_processors = 2
inputbuffer_wait_strategy = blocking
# Enable the disk based message journal.
message_journal_enabled = true
# The directory which will be used to store the message journal. The directory must me exclusively used by Graylog and
# must not contain any other files than the ones created by Graylog itself.
message_journal_dir = /var/lib/graylog-server/journal
# Journal hold messages before they could be written to Elasticsearch.
# For a maximum of 12 hours or 5 GB whichever happens first.
# During normal operation the journal will be smaller.
#message_journal_max_age = 12h
#message_journal_max_size = 5gb
#message_journal_flush_age = 1m
#message_journal_flush_interval = 1000000
#message_journal_segment_age = 1h
#message_journal_segment_size = 100mb
# Number of threads used exclusively for dispatching internal events. Default is 2.
#async_eventbus_processors = 2
# EXPERIMENTAL: Dead Letters
# Every Failed indexing attempt is logged by default and made visible in the web-interface. You can enable
# the experimental dead letters feature to write every message that was not successfully indexed into the
# MongoDB "dead_letters" collection to make sure that you never lose a message. The actual writing of dead
# letter should work fine already but it is not heavily tested yet and will get more features in future
# releases.
dead_letters_enabled = false
# How many seconds to wait between marking node as DEAD for possible load balancers and starting the actual
# shutdown process. Set to 0 if you have no status checking load balancers in front.
lb_recognition_period_seconds = 3
# Every message is matched against the configured streams and it can happen that a stream contains rules which
# take an unusual amount of time to run,for example if its using regular expressions that perform excessive backtracking.
# This will impact the processing of the entire server. To keep such misbehaving stream rules from impacting other
# streams,Graylog limits the execution time for each stream.
# The default values are noted below,the timeout is in milliseconds.
# If the stream matching for one stream took longer than the timeout value,and this happened more than "max_faults" times
# that stream is disabled and a notification is shown in the web interface.
#stream_processing_timeout = 2000
#stream_processing_max_faults = 3
# Length of the interval in seconds in which the alert conditions for all streams should be checked
# and alarms are being sent.
#alert_check_interval = 60
# Since 0.21 the graylog2 server supports pluggable output modules. This means a single message can be written to multiple
# outputs. The next setting defines the timeout for a single output module,including the default output module where all
# messages end up.
#
# Time in milliseconds to wait for all message outputs to finish writing a single message.
#output_module_timeout = 10000
# Time in milliseconds after which a detected stale master node is being rechecked on startup.
#stale_master_timeout = 2000
# Time in milliseconds which Graylog is waiting for all threads to stop on shutdown.
#shutdown_timeout = 30000
# MongoDB Configuration
mongodb_useauth = false
#mongodb_user = grayloguser
#mongodb_password = 123
mongodb_host = 127.0.0.1
#mongodb_replica_set = localhost:27017,localhost:27018,localhost:27019
mongodb_database = graylog2
mongodb_port = 27017
# Raise this according to the maximum connections your MongoDB server can handle if you encounter MongoDB connection problems.
mongodb_max_connections = 100
# Number of threads allowed to be blocked by MongoDB connections multiplier. Default: 5
# If mongodb_max_connections is 100,and mongodb_threads_allowed_to_block_multiplier is 5,then 500 threads can block. More than that and an exception will be thrown.
# http://api.mongodb.org/java/current/com/mongodb/MongoOptions.html#threadsAllowedToBlockForConnectionMultiplier
mongodb_threads_allowed_to_block_multiplier = 5
# Drools Rule File (Use to rewrite incoming log messages)
# See: https://www.graylog.org/documentation/general/rewriting/
#rules_file = /etc/graylog/server/rules.drl
# Email transport
#transport_email_enabled = false
#transport_email_hostname = mail.example.com
#transport_email_port = 587
#transport_email_use_auth = true
#transport_email_use_tls = true
#transport_email_use_ssl = true
#transport_email_auth_username = you@example.com
#transport_email_auth_password = secret
#transport_email_subject_prefix = [graylog2]
#transport_email_from_email = graylog2@example.com
# Specify and uncomment this if you want to include links to the stream in your stream alert mails.
# This should define the fully qualified base url to your web interface exactly the same way as it is accessed by your users.
#transport_email_web_interface_url = https://graylog2.example.com
# HTTP proxy for outgoing HTTP calls
#http_proxy_uri =
# Disable the optimization of Elasticsearch indices after index cycling. This may take some load from Elasticsearch
# on heavily used systems with large indices,but it will decrease search performance. The default is to optimize
# cycled indices.
#disable_index_optimization = true
# Optimize the index down to <= index_optimization_max_num_segments. A higher number may take some load from Elasticsearch
# on heavily used systems with large indices,but it will decrease search performance. The default is 1.
#index_optimization_max_num_segments = 1
# Disable the index range calculation on all open/available indices and only calculate the range for the latest
# index. This may speed up index cycling on systems with large indices but it might lead to wrong search results
# in regard to the time range of the messages (i. e. messages within a certain range may not be found). The default
# is to calculate the time range on all open/available indices.
#disable_index_range_calculation = true
# The threshold of the garbage collection runs. If GC runs take longer than this threshold,a system notification
# will be generated to warn the administrator about possible problems with the system. Default is 1 second.
#gc_warning_threshold = 1s
# Connection timeout for a configured LDAP server (e. g. ActiveDirectory) in milliseconds.
#ldap_connection_timeout = 2000
# https://github.com/bazhenov/groovy-shell-server
#groovy_shell_enable = false
#groovy_shell_port = 6789
# Enable collection of Graylog-related metrics into MongoDB
#enable_metrics_collection = false
# Disable the use of SIGAR for collecting system stats
#disable_sigar = false
[root@logserver init.d]$ cat /etc/graylog/web/web.conf # graylog2-server REST URIs (one or more,comma separated) For example: "http://127.0.0.1:12900/,http://127.0.0.1:12910/" graylog2-server.uris="http://127.0.0.1:12900/" # Learn how to configure custom logging in the documentation: # https://www.graylog.org/documentation/setup/webinterface/ # Secret key # ~~~~~ # The secret key is used to secure cryptographics functions. Set this to a long and randomly generated string. # If you deploy your application to several instances be sure to use the same key! # Generate for example with: pwgen -N 1 -s 96 application.secret="Vio48oiufs4TD6XBN0PXZT2FvPmfs1L3BvbByvo7Pwwz7mUyR0HUlMspNxdQ8dKdHpSwmh67cbkISlPs9cmzqTkJXVHFrI9P" # Web interface timezone # Graylog stores all timestamps in UTC. To properly display times,set the default timezone of the interface. # If you leave this out,Graylog will pick your system default as the timezone. Usually you will want to configure it explicitly. # timezone="Europe/Berlin" timezone="Asia/Shanghai" # Message field limit # Your web interface can cause high load in your browser when you have a lot of different message fields. The default # limit of message fields is 100. Set it to 0 if you always want to get all fields. They are for example used in the # search result sidebar or for autocompletion of field names. field_list_limit=100 # Use this to run Graylog with a path prefix #application.context=/graylog2 # You usually do not want to change this. application.global=lib.Global原文链接：https://www.f2er.com/javaschema/284696.html
