Centos 7下IPV6 有状态DHCPV6配置

前端之家收集整理的这篇文章主要介绍了Centos 7下IPV6 有状态DHCPV6配置前端之家小编觉得挺不错的,现在分享给大家,也给大家做个参考。

yum源安装kea

yum install epel-release

yum install kea



DEMON

ps aux| grep kea

rpm -qa kea


查看dhcpv6默认配置

cat /etc/kea/kea.conf


启动kea-dhcpv6并查看kea启动过程

systemctl start kea-dhcp6

systemctl status kea-dhcp6

systemctl -l status kea-dhcp6


通过tcpdump查看服务器数据包交互过程

tcpdump -i eth0 -w dhcp6.pcap




关闭防火墙

systemctl stop firewalld.service

注意:必须要关闭防火墙否则造成dhcpv6分配地址无法下发。


用到的文件

/var/lib/kea/kea-leases6.csv 默认情况下存放ipv6地址以及终端的设备信息,可查看到域账号mac地址等信息。

/var/log/kea-dhcp6.log 我开的debug模式。可查看dhcp6运行状态的日志。



Centos 7 修改dns

修改/etc/NetworkManager/NetworkManager.conf

[main]

plugins=ifcfg-rh

dns=none

手工修改 /etc/resolv.conf

nameserver 114.114.114.114

nameserver 8.8.8.8


服务器网卡静态ipv6配置:


[root@localhost kea]# vi /etc/sysconfig/network-scripts/ifcfg-eno16777736

TYPE=Ethernet

BOOTPROTO=static

DEFROUTE=yes

PEERDNS=yes

PEERROUTES=yes

IPV4_FAILURE_FATAL=no

IPV6INIT=yes

IPV6_AUTOCONF=no

IPV6_DEFROUTE=yes

IPV6_PEERDNS=yes

IPV6_PEERROUTES=yes

IPV6_FAILURE_FATAL=no

NAME=eno16777736

UUID=03b35ca7-4678-48ca-ab46-5782367cd56a

DEVICE=eno16777736

ONBOOT=yes

IPADDR=X.X.X.X

GATEWAY=X.X.X.X

NETMASK=X.X.X.X

IPVADDR=2001:da8:XXXX:XXXX:24::125

IPV6_DEFAULTGW=2001:da8:XXXX:XXXX:24::1

IPV6ADDR=2001:da8:XXXX:XXXX:24::125/80




kea-dhcpv6 配置:


{


"Dhcp6":

{

# Add names of interfaces to listen on.

"interfaces-config": {

"interfaces": ["eno16777736/2001:da8:XXXX:XXXX:24:aefd:ddb0:7d02"]

},


"option-data": [{"name": "unicast","data": "2001:da8:XXXX:XXXX:24:aefd:ddb0:7d02"} ],

# Use Memfile lease database backend to store leases in a CSV file.


# Setup reclamation of the expired leases and leases affinity.

# Expired leases will be reclaimed every 10 seconds. Every 25

# seconds reclaimed leases,which have expired more than 3600

# seconds ago,will be removed. The limits for leases reclamation

# are 100 leases or 250 ms for a single cycle. A warning message

# will be logged if there are still expired leases in the

# database after 5 consecutive reclamation cycles.

# "expired-leases-processing": {

# "reclaim-timer-wait-time": 10,

# "flush-reclaimed-timer-wait-time": 25,

# "hold-reclaimed-time": 3600,

# "max-reclaim-leases": 100,

# "max-reclaim-time": 250,

# "unwarned-reclaim-cycles": 5

# },


# Addresses will be assigned with preferred and valid lifetimes

# being 3000 and 4000,respectively. Client is told to start

# renewing after 1000 seconds. If the server does not respond

# after 2000 seconds since the lease was granted,client is supposed

# to start REBIND procedure (emergency renewal that allows switching

# to a different server).

"preferred-lifetime": 3000,

"valid-lifetime": 4000,

"renew-timer": 1000,

"rebind-timer": 2000,


# The following list defines subnets. Uncomment to enable them.

"subnet6": [

{ "subnet": "2001:da8:XXXX:XXXX:25::/80",

"pools": [ { "pool": "2001:da8:XXXX:XXXX:25::/80" } ],

"interface-id":"vlan25"


},


{ "subnet": "2001:da8:XXXX:XXXX:26::/80",

"pools": [ { "pool": "2001:da8:XXXX:XXXX:26::/80" } ],

"interface-id":"vlan26"


},

# { "subnet": "2001:db8:3::/64",

# "pools": [ { "pool": "2001:db8:3::/80" } ] },

# { "subnet": "2001:db8:4::/64",

# "pools": [ { "pool": "2001:db8:4::/80" } ] }

]

},


# DHCP DDNS configuration starts here.


# Logging configuration starts here. It tells Kea servers to store

# all log messages (on severity INFO or more) in a file.

# debuglevel variable is used on DEBUG level only.

"Logging":

{

"loggers": [

{

"name": "kea-dhcp4",

"output_options": [

{

"output": "/var/log/kea-dhcp4.log"

}

],

"severity": "INFO",

"debuglevel": 0

},

{

"name": "kea-dhcp6",

"output_options": [

{

"output": "/var/log/kea-dhcp6.log"

}

],

"severity": "DEBUG",/日志开启到debug级别,可以查看分配的地址信息。

"debuglevel": 99

},

{

"name": "kea-dhcp-ddns",

"output_options": [

{

"output": "/var/log/kea-ddns.log"

}

],

"debuglevel": 0

}

]

}


}



如果自己网段内需要dhcpv6服务 需开通以下:




[root@localhost kea]# cat /etc/kea/kea.conf

# This is a basic configuration for the Kea DHCPv4 and DHCPv6 servers.

# Subnet declarations are commented out and no interfaces are listed.

# Therefore,the servers will not listen or respond to any queries.

# The basic configuration must be extended to specify interfaces on

# which the servers should listen. Also,subnets and options must be

# declared.

{


# DHCPv4 configuration starts here.

#"Dhcp4":

#{

# Add names of interfaces to listen on.

# "interfaces-config": {

# "interfaces": [ ]

# },


# Use Memfile lease database backend to store leases in a CSV file.

# "lease-database": {

# "type": "memfile"

# },


# Setup reclamation of the expired leases and leases affinity.

# Expired leases will be reclaimed every 10 seconds. Every 25

# seconds reclaimed leases,


# Global (inherited by all subnets) lease lifetime is mandatory parameter.

# "valid-lifetime": 4000,


# Below an example of the simple subnet declaration. Uncomment to

# enable it. This is a list,denoted with [ ],of structure,denoted

# with { }. Each structure describes a single subnet and may have

# several parameters. One of those parameters is "pools" that is

# also a list of structures.

# "subnet4": [

# { "subnet": "192.0.2.0/24",

# "pools": [ { "pool": "192.0.2.1 - 192.0.2.200" } ] }

# ]

#},


# DHCPv6 configuration starts here.

"Dhcp6":

{

# Add names of interfaces to listen on.

"interfaces-config": {

"interfaces": ["eno16777736/2001:da8:XXXX:XXXX:24::125"]

},"data": "2001:da8:XXXX:XXXX:24::125"} ],


{ "subnet": "2001:da8:XXXX:XXXX:24::/80",

"pools": [ { "pool": "2001:da8:XXXX:XXXX:24::/80" } ],

"interface":"eno16777736"


},

{ "subnet": "2001:da8:XXXX:XXXX:26::/80",

"debuglevel": 99

},

"debuglevel": 0

}

]

}


}

原文链接:https://www.f2er.com/centos/379650.html

猜你在找的CentOS相关文章