本篇包含安装+迁移+版本升级的内容，应该能适合绝大多数想迁移或想升级但又怕麻烦或出现问题的朋友。
大致步骤如下：
在北京先将zimbra8.5.1升级到8.7.1
在香港安装新的8.7.1
将北京停机，香港停机，把香港的/opt/zimbra/备份，然后把北京的/opt/zimbra/目录完整的同步到香港
启动香港zimbra服务并验证是否正常工作
步骤一：升级北京zimbra从8.5.1到8.7.1
升级北京zimbra8.5.1到8.7.1。
升级步骤请看：http://www.chenxie.net/archives/1483.html
步骤二：在香港全新安装zimbra8.7.1
系统环境：阿里云香港地域 CentOS 6.5_x64
软件版本：Zimbra 8.7.1
安装准备工作
安装须知：
1. zimbra不支持32位操作系统，请使用64位操作系统；
2. zimbra默认安装在/opt目录，所以请务必保证/opt目录有足够的空间，我是单独挂载的一块数据盘给/opt的。
3.zimbra在安装时要检测MX，所以要在之前配置好dns MX解析；
4.关闭sendmail或postfix服务，避免25端口被占用,阿里云默认没有安装，如果有安装请执行以下：
/etc/init.d/sendmail stop
chkconfig sendmail off
/etc/init.d/postfix stop
chkconfig postfix off
安装前准备工作：
2. 打开防火墙并开放以下端口，如果你在使用阿里云的安全组，那么请在安全组中开放这些端口
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport80-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport443-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport7071-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport8087-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport8080-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport8443-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport25-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport110-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport143-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport993-jACCEPT
-AINPUT-mstate--stateNEW-mtcp-ptcp--dport995-jACCEPT
|
3. 配置主机名，编辑/etc/sysconfig/network
HOSTNAME=mail.chenxie.net
4. 配置hosts，编辑/etc/hosts
10.172.250.121 mail.chenxie.net
5. 重启一下操作系统保证配置都生效了。
# reboot
6. 安装dnsmasq 用于配置本地DNS，因为zimbra安装时要检测MX记录，由于域名的MX记录在生产上正在使用所以不能用生产的解析，等会儿使用本地解析。
# yum install dnsmasq bind-utils
配置dnsmasq:
添加以下到/etc/dnsmasq.conf
server=127.0.0.1
domain=chenxie.net
mx-host=chenxie.net,mail.chenxie.net,5
编辑/etc/resolv.conf ，将 nameserver 127.0.0.1 添加到原有的dns配置前面：
options timeout:1 attempts:1 rotate
nameserver 127.0.0.1
nameserver 10.143.22.116
nameserver 10.143.22.118
启动dnsmasq：
# /etc/init.d/dnsmasq start
测试：
[root@mail~]#digchenxie.netMX
;<<>>DiG9.8.2rc1-RedHat-9.8.2-0.47.rc1.el6_8.3<<>>chenxie.netMX
;;globaloptions:+cmd
;;Gotanswer:
;;->>HEADER<<-opcode:QUERY,status:NOERROR,id:23313
;;flags:qraardra;QUERY:1,ANSWER:1,AUTHORITY:0,ADDITIONAL:1
;;QUESTIONSECTION:
;chenxie.net.INMX
;;ANSWERSECTION:chenxie.net.0INMX5mail.chenxie.net.
;;ADDITIONALSECTION:
mail.chenxie.net.0INA10.172.54.1
;;Querytime:0msec
;;SERVER:127.0.0.1#53(127.0.0.1)
;;WHEN:TueNov2918:20:232016
;;MSGSIZErcvd:73
开始安装
下载zimbra安装文件放置到/opt/software/目录下：
# cd /opt/software/
# wgethttps://files.zimbra.com/downloads/8.7.1_GA/zcs-8.7.1_GA_1670.RHEL6_64.20161025035141.tgz
# tree /opt/
/opt/
└── software
└── zcs-8.7.1_GA_1670.RHEL6_64.20161025035141.tgz
2. 解压文件并安装
# cd /opt/software/
# tar -zxf zcs-8.7.1_GA_1670.RHEL6_64.20161025035141.tgz
# cd zcs-8.7.1_GA_1670.RHEL6_64.20161025035141
# ./install.sh
安装时会自动通过yum安装一些依赖包，我就不写了，视具体情况而定，以下是安装完依赖包后的步骤：
Operations logged to /tmp/install.log.sFgtLCfI
Checking for existing installation…
zimbra-ldap…NOT FOUND
zimbra-logger…NOT FOUND
zimbra-mta…NOT FOUND
zimbra-dnscache…NOT FOUND
zimbra-snmp…NOT FOUND
zimbra-store…NOT FOUND
zimbra-apache…NOT FOUND
zimbra-spell…NOT FOUND
zimbra-convertd…NOT FOUND
zimbra-memcached…NOT FOUND
zimbra-proxy…NOT FOUND
zimbra-archiving…NOT FOUND
zimbra-core…NOT FOUND
―――――――――――――――――――――――-
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE.
SYNACOR,INC. ("SYNACOR") WILL ONLY LICENSE THIS SOFTWARE TO YOU IF YOU
FIRST ACCEPT THE TERMS OF THIS AGREEMENT. BY DOWNLOADING OR INSTALLING
THE SOFTWARE,OR USING THE PRODUCT,YOU ARE CONSENTING TO BE BOUND BY
THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS
AGREEMENT,THEN DO NOT DOWNLOAD,INSTALL OR USE THE PRODUCT.
License Terms for this Zimbra Collaboration Suite Software:
https://www.zimbra.com/license/zimbra-public-eula-2-6.html
―――――――――――――――――――――――-
Do you agree with the terms of the software license agreement? [N] y
Checking for installable packages
Found zimbra-core
Found zimbra-ldap
Found zimbra-logger
Found zimbra-mta
Found zimbra-dnscache
Found zimbra-snmp
Found zimbra-store
Found zimbra-apache
Found zimbra-spell
Found zimbra-memcached
Found zimbra-proxy
Use Zimbra's package repository [Y] y
Importing Zimbra GPG key
Configuring package repository
Select the packages to install
Install zimbra-ldap [Y] y
Install zimbra-logger [Y] y
Install zimbra-mta [Y] y
Install zimbra-dnscache [Y] y
Install zimbra-snmp [Y] y
Install zimbra-store [Y] y
Install zimbra-apache [Y] y
Install zimbra-spell [Y] y
Install zimbra-memcached [Y] y
Install zimbra-proxy [Y] y
Checking required space for zimbra-core
Checking space for zimbra-store
Checking required packages for zimbra-store
zimbra-store package check complete.
Installing:
zimbra-core
zimbra-ldap
zimbra-logger
zimbra-mta
zimbra-dnscache
zimbra-snmp
zimbra-store
zimbra-apache
zimbra-spell
zimbra-memcached
zimbra-proxy
The system will be modified. Continue? [N] y
Installing packages
zimbra-core will be downloaded.
zimbra-ldap will be downloaded.
zimbra-logger will be downloaded.
zimbra-mta will be downloaded.
zimbra-dnscache will be downloaded.
zimbra-snmp will be downloaded.
zimbra-store will be downloaded.
zimbra-apache will be downloaded.
zimbra-spell will be downloaded.
zimbra-memcached will be downloaded.
zimbra-proxy will be downloaded.
Downloading packages. This will not modify the system. This may take some time.
Removing /opt/zimbra
Removing zimbra crontab entry…done.
Cleaning up zimbra init scripts…done.
Cleaning up /etc/security/limits.conf…done.
Finished removing Zimbra Collaboration Server.
Local packages zimbra-core zimbra-ldap zimbra-logger zimbra-mta zimbra-dnscache zimbra-snmp zimbra-store zimbra-apache zimbra-spell zimbra-proxy selected for installation
Monitor /tmp/install.log.9nWB1XnZ for package installation progress
Remote package installation started
Installing zimbra-core-components zimbra-ldap-components zimbra-mta-components zimbra-dnscache-components zimbra-snmp-components zimbra-store-components zimbra-apache-components zimbra-spell-components zimbra-memcached zimbra-proxy-components….done
Local package installation started
Installing zimbra-core zimbra-ldap zimbra-logger zimbra-mta zimbra-dnscache zimbra-snmp zimbra-store zimbra-apache zimbra-spell zimbra-proxy…done
done
Operations logged to /tmp/zmsetup.20161201-103915.log
Installing LDAP configuration database…done.
Setting defaults…
DNS ERROR resolving MX for mail.chenxie.net
It is suggested that the domain name have an MX record configured in DNS
Change domain name? [Yes] yes
Create domain: [mail.chenxie.net] chenxie.net
MX: mail.chenxie.net (10.172.54.1)
Interface: 10.172.54.1
Interface: 47.90.75.9
Interface: 127.0.0.1
done.
Checking for port conflicts
Port conflict detected: 53 (zimbra-dnscache)
Port conflicts detected! �C Press Enter/Return key to continue
Main menu
1) Common Configuration:
2) zimbra-ldap: Enabled
3) zimbra-logger: Enabled
4) zimbra-mta: Enabled
5) zimbra-dnscache: Enabled
6) zimbra-snmp: Enabled
7) zimbra-store: Enabled
+Create Admin User: yes
+Admin user to create: admin@chenxie.net
******* +Admin Password UNSET
+Anti-virus quarantine user: virus-quarantine.ixdzg4jo@chenxie.net
+Enable automated spam training: yes
+Spam training user: spam.enepraclvp@chenxie.net
+Non-spam(Ham) training user: ham.vxwv4puwa@chenxie.net
+SMTP host: mail.chenxie.net
+Web server HTTP port: 8080
+Web server HTTPS port: 8443
+Web server mode: https
+IMAP server port: 7143
+IMAP server SSL port: 7993
+POP server port: 7110
+POP server SSL port: 7995
+Use spell check server: yes
+Spell server URL: http://mail.chenxie.net:7780/aspell.PHP
+Enable version update checks: TRUE
+Enable version update notifications: TRUE
+Version update notification email: admin@chenxie.net
+Version update source email: admin@chenxie.net
+Install mailstore (service webapp): yes
+Install UI (zimbra,zimbraAdmin webapps): yes
8) zimbra-spell: Enabled
9) zimbra-proxy: Enabled
10) Default Class of Service Configuration:
s) Save config to file
x) Expand menu
q) Quit
Address unconfigured (**) items (? �C help) 7
Store configuration
1) Status: Enabled
2) Create Admin User: yes
3) Admin user to create: admin@chenxie.net
** 4) Admin Password UNSET
5) Anti-virus quarantine user: virus-quarantine.ixdzg4jo@chenxie.net
6) Enable automated spam training: yes
7) Spam training user: spam.enepraclvp@chenxie.net
8) Non-spam(Ham) training user: ham.vxwv4puwa@chenxie.net
9) SMTP host: mail.chenxie.net
10) Web server HTTP port: 8080
11) Web server HTTPS port: 8443
12) Web server mode: https
13) IMAP server port: 7143
14) IMAP server SSL port: 7993
15) POP server port: 7110
16) POP server SSL port: 7995
17) Use spell check server: yes
18) Spell server URL: http://mail.chenxie.net:7780/aspell.PHP
19) Enable version update checks: TRUE
20) Enable version update notifications: TRUE
21) Version update notification email: admin@chenxie.net
22) Version update source email: admin@chenxie.net
23) Install mailstore (service webapp): yes
24) Install UI (zimbra,zimbraAdmin webapps): yes
Select,or 'r' for prevIoUs menu [r] 4
Password for admin@chenxie.net (min 6 characters): [TTHVZPfKt] chenxie.net.
Store configuration
1) Status: Enabled
2) Create Admin User: yes
3) Admin user to create: admin@chenxie.net
4) Admin Password set
5) Anti-virus quarantine user: virus-quarantine.ixdzg4jo@chenxie.net
6) Enable automated spam training: yes
7) Spam training user: spam.enepraclvp@chenxie.net
8) Non-spam(Ham) training user: ham.vxwv4puwa@chenxie.net
9) SMTP host: mail.chenxie.net
10) Web server HTTP port: 8080
11) Web server HTTPS port: 8443
12) Web server mode: https
13) IMAP server port: 7143
14) IMAP server SSL port: 7993
15) POP server port: 7110
16) POP server SSL port: 7995
17) Use spell check server: yes
18) Spell server URL: http://mail.chenxie.net:7780/aspell.PHP
19) Enable version update checks: TRUE
20) Enable version update notifications: TRUE
21) Version update notification email: admin@chenxie.net
22) Version update source email: admin@chenxie.net
23) Install mailstore (service webapp): yes
24) Install UI (zimbra,or 'r' for prevIoUs menu [r] r
Main menu
1) Common Configuration:
2) zimbra-ldap: Enabled
3) zimbra-logger: Enabled
4) zimbra-mta: Enabled
5) zimbra-dnscache: Enabled
6) zimbra-snmp: Enabled
7) zimbra-store: Enabled
8) zimbra-spell: Enabled
9) zimbra-proxy: Enabled
10) Default Class of Service Configuration:
s) Save config to file
x) Expand menu
q) Quit
*** CONFIGURATION COMPLETE �C press 'a' to apply
Select from menu,or press 'a' to apply config (? �C help) a
Save configuration data to a file? [Yes] yes
Save config in file: [/opt/zimbra/config.6020]
Saving config in /opt/zimbra/config.6020…done.
The system will be modified �C continue? [No] yes
Operations logged to /tmp/zmsetup.20161201-103915.log
Setting local config values…done.
Initializing core config…Setting up CA…done.
Deploying CA to /opt/zimbra/conf/ca …done.
Creating SSL zimbra-store certificate…done.
Creating new zimbra-ldap SSL certificate…done.
Creating new zimbra-mta SSL certificate…done.
Creating new zimbra-proxy SSL certificate…done.
Installing mailBoxd SSL certificates…done.
Installing MTA SSL certificates…done.
Installing LDAP SSL certificate…done.
Installing Proxy SSL certificate…done.
Initializing ldap…done.
Setting replication password…done.
Setting Postfix password…done.
Setting amavis password…done.
Setting Nginx password…done.
Setting BES searcher password…done.
Creating server entry for mail.chenxie.net…done.
Setting Zimbra IP Mode…done.
Saving CA in ldap…done.
Saving SSL Certificate in ldap…done.
Setting spell check URL…done.
Setting service ports on mail.chenxie.net…done.
Setting zimbraFeatureTasksEnabled=TRUE…done.
Setting zimbraFeatureBriefcasesEnabled=TRUE…done.
Checking current setting of zimbraReverseProxyAvailableLookupTargets
Querying LDAP for other mailstores
Searching LDAP for reverseProxyLookupTargets…done.
Adding mail.chenxie.net to zimbraReverseProxyAvailableLookupTargets
Setting Master DNS IP address(es)…done.
Setting DNS cache tcp lookup preference…done.
Setting DNS cache udp lookup preference…done.
Setting DNS tcp upstream preference…done.
Setting TimeZone Preference…done.
Initializing mta config…done.
Setting services on mail.chenxie.net…done.
Adding mail.chenxie.net to zimbraMailHostPool in default COS…done.
Creating domain chenxie.net…done.
Setting default domain name…done.
Creating domain chenxie.net…already exists.
Creating admin account admin@chenxie.net…done.
Creating root alias…done.
Creating postmaster alias…done.
Creating user spam.enepraclvp@chenxie.net…done.
Creating user ham.vxwv4puwa@chenxie.net…done.
Creating user virus-quarantine.ixdzg4jo@chenxie.net…done.
Setting spam training and Anti-virus quarantine accounts…done.
Initializing store sql database…done.
Setting zimbraSmtpHostname for mail.chenxie.net…done.
Configuring SNMP…done.
Setting up syslog.conf…done.
Starting servers…done.
Installing common zimlets…
com_zimbra_cert_manager…done.
com_zimbra_phone…done.
com_zimbra_mailarchive…done.
com_zimbra_attachcontacts…done.
com_zimbra_proxy_config…done.
com_zimbra_bulkprovision…done.
com_zimbra_srchHighlighter…done.
com_zimbra_date…done.
com_zimbra_clientuploader…done.
com_zimbra_attachmail…done.
com_zimbra_adminversioncheck…done.
com_zimbra_viewmail…done.
com_zimbra_email…done.
com_zimbra_tooltip…done.
com_zimbra_webex…done.
com_zimbra_url…done.
com_zimbra_ymemoticons…done.
Finished installing common zimlets.
Restarting mailBoxd…done.
Creating galsync account for default domain…done.
You have the option of notifying Zimbra of your installation.
This helps us to track the uptake of the Zimbra Collaboration Server.
The only information that will be transmitted is:
The VERSION of zcs installed (8.7.1_GA_1670_RHEL6_64)
The ADMIN EMAIL ADDRESS created (admin@chenxie.net)
Notify Zimbra of your installation? [Yes] no
Notification skipped
Setting up zimbra crontab…done.
Moving /tmp/zmsetup.20161201-103915.log to /opt/zimbra/log
Configuration complete �C press return to exit
安装完成。
普通用户访问地址：https://mail.chenxie.net/
管理员访问地址：https://mail.chenxie.net:7071/zimbraAdmin/
基本管理：
# su �C zimbra
[zimbra@mail ~]$ zmcontrol start//启动
[zimbra@mail ~]$ zmcontrol stop//停止
[zimbra@mail ~]$ zmcontrol restart//重启
[zimbra@mail ~]$ zmcontrol status//查看服务状态
步骤三：停止北京和香港服务，进行/opt/zimbra目录迁移
# rsync -avzPO �Cdelete /opt/zimbra/ root@ip:/opt/zimbra/
文件同步完成后在香港启动zimbra服务：
# /etc/init.d/zimbra start
最后修改MX记录，生效后就OK了。
原文链接：https://www.f2er.com/centos/378608.html