CentOS / RHEL v6.x: Install And Configure Serial Console

前端之家收集整理的这篇文章主要介绍了CentOS / RHEL v6.x: Install And Configure Serial Console前端之家小编觉得挺不错的,现在分享给大家,也给大家做个参考。

CentOS / RHEL v6.x: Install And Configure Serial Console

You need to use setserial command. The command is designed to set and/or report the configuration information associated with a serial port.

setserial -g /dev/ttyS[0123]

Sample outputs:

/dev/ttyS0,UART: 16550A,Port: 0x03f8,IRQ: 4
/dev/ttyS1,Port: 0x02f8,IRQ: 3
/dev/ttyS2,UART: unknown,Port: 0x03e8,IRQ: 4
/dev/ttyS3,Port: 0x02e8,IRQ: 3

Our sample setup

I am going to use the following configuration:

Device name : /dev/ttyS1
Speed: 19200
Word: 8
Parity: No
Grub config file : /etc/grub.conf or /boot/grub/grub.conf
Secure tty config file : /etc/securetty
Upstart config file to start agetty on /dev/ttyS1: /etc/init/ttyS1.conf

Step #1: Grub configuration

Type the following command:

# vi /boot/grub/grub.conf

Add the following lines befor :hiddenmenu config options:

serial --unit=1 --speed=19200 --word=8 --parity=no --stop=1
terminal --timeout=5 serial console

Scroll down and find out kernel line and append the following config options:

console=tty0 console=ttyS1,19200n8

At the end your grub.conf should look as follows:

default=0
timeout=5
#splashimage=(hd0,0)/grub/splash.xpm.gz
serial --unit=1 --speed=19200 --word=8 --parity=no --stop=1
terminal --timeout=5 serial console
:hiddenmenu
title Red Hat Enterprise Linux Server (2.6.32-358.el6.x86_64)
        root (hd0,0)
        kernel /vmlinuz-2.6.32-358.el6.x86_64 ro root=UUID=00f30f09-2bfb-4dde-8396-eea16c0ee21a nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD  KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_LVM rd_NO_DM rhgb  pcie_aspm=off biosdevname=0 console=tty0 console=ttyS1,19200n8
        initrd /initramfs-2.6.32-358.el6.x86_64.img
title Red Hat Enterprise Linux (2.6.32-279.el6.x86_64)
        root (hd0,0)
        kernel /vmlinuz-2.6.32-279.el6.x86_64 ro root=UUID=00f30f09-2bfb-4dde-8396-eea16c0ee21a nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD  KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_LVM rd_NO_DM rhgb  pcie_aspm=off biosdevname=0 console=tty0 console=ttyS1,19200n8
        initrd /initramfs-2.6.32-279.el6.x86_64.img

Step #2: Secure tty configuration

Type the following command:

# vi /etc/securetty

Append the following entry:

ttyS1

Save and close the file.

Step #3: Upstart configuration

init is upstart process management daemon. init is the parent of all processes on the system,it is executed by the kernel and is responsible for starting all other processes; it is the parent of all processes whose natural parents have died and it is responsible for reaping those when they die. Processes managed by init are known as jobs and are defined by files in the /etc/init directory. Type the following command to create /etc/init/ttyS1.conf file,enter::

# vi /etc/init/ttyS1.conf

Append the following config options:

start on runlevel [345] stop on runlevel [S016] respawn instance /dev/ttyS1 exec /sbin/agetty ttyS1 19200 vt100-nav

Save and close the file.

Step 4: Verify settings

Reboot the server:

# reboot

Connect to console using serial console utility.

原文链接:https://www.f2er.com/centos/377565.html

猜你在找的CentOS相关文章